Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Still no start....

Thread Tools
 
Search this Thread
 
Old Nov 9, 2013 | 08:26 PM
  #31  
DFlintstone's Avatar
CF Veteran
 
Joined: Aug 2011
Posts: 10,489
Likes: 24
From: Nor-Cal Coast
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
Default

Originally Posted by Bullstang360
and found zero volts on one pin, 5v on the next pin and 9v on the last pin.
No Idea if shooting any voltage in to the CPS output can harm it. Seems plausible.

Originally Posted by Radi
Every time I've heard a PCM/ECU start squealing it's had a failing power supply regulator.
Another 10 Pts to Radi for post #2!...

Last edited by DFlintstone; Nov 9, 2013 at 08:32 PM.
Reply
Old Nov 9, 2013 | 10:56 PM
  #32  
Bullstang360's Avatar
Thread Starter
Member
 
Joined: Oct 2012
Posts: 161
Likes: 0
From: Poulsbo, Wa
Year: 1991
Model: Cherokee
Engine: 4.0 HO
Default

Yah good spark.
Reply
Old Nov 9, 2013 | 11:31 PM
  #33  
DFlintstone's Avatar
CF Veteran
 
Joined: Aug 2011
Posts: 10,489
Likes: 24
From: Nor-Cal Coast
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
Default

If it has spark, compression, and fuel, it will fire if it's not flooded.

Even if the cam or dizzy were out to lunch it should cough, sputter, or backfire or something.

It spurts fuel out the schader valve, (into the rag you are holding there), and does not fire with starting fluid?

This is my first Utube, with my first experiment with a homemade noid light to check injector pulse. I guess a common, (if you can find one) 3 volt LED light works, note, led's are polarity sensitive, will only work one way.

http://www.youtube.com/watch?v=nPdkU...ature=youtu.be

It's allot easier to test your injector pulse that way.
Attached Thumbnails Still no start....-102_0284.jpg  

Last edited by DFlintstone; Nov 9, 2013 at 11:36 PM.
Reply
Old Nov 10, 2013 | 09:02 AM
  #34  
Bullstang360's Avatar
Thread Starter
Member
 
Joined: Oct 2012
Posts: 161
Likes: 0
From: Poulsbo, Wa
Year: 1991
Model: Cherokee
Engine: 4.0 HO
Default

Would a bad MAP sensor cause a complete no start?
Reply
Old Nov 10, 2013 | 01:46 PM
  #35  
DFlintstone's Avatar
CF Veteran
 
Joined: Aug 2011
Posts: 10,489
Likes: 24
From: Nor-Cal Coast
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
Default

Although my 90 has allot different than your 91, I think they share there. Mine will ether do nothing, (just crank), or crank and sputter some if I unplug my MAP. It normally won't start.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cholthauss
Fabrication & builders section.
50
Jul 22, 2020 12:29 PM
william16339
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Jul 1, 2015 09:22 AM
mapticon
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
Jan 2, 2015 12:45 AM
michaeldamann
Jeep Builds
11
Aug 14, 2014 12:22 AM
pisces3737
Cherokee Chat
5
Jun 21, 2014 04:06 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 12:59 AM.