rtralabama

i am installing new rear speakers and idk which line from the jeep is positive or negative. one is grey and yellow and the other is grey and blue. its basic but i have no idea which one is positive or negative lol

stuck like chuck

test light them. turn the jeep on and which ever one has power to it is your positive

trebor46

just put them in the speaker with the radio on and when it turns on you know you have the right combination, it wont hurt the speaker if you mix them up it just wont turn on. At least thats how I've done my last three vehicles with no problems

alpine.adrenaline

It'll probably work either way. If you get it wrong it won't hurt anything.

rtralabama

alright. the other side i just found out is blue and orange, blue and white lol i think blue and white it positive, people told me white is NORMALLY positive.

Cherockee

Yikes!

Lets start by asking, you are just hooking up speakers, correct? Two speakers? Two wires going to each speaker or do you only have two wires total? Are you trying to hook these up at the speakers or at the radio?

You won't have DC power on the speaker wires so a test light wont help you.

Get back to me with those answers and I'll help ya.

rtralabama

Just two rear sony 5 1/4" speakers with two wires. two wires to each speaker. on the speaker there is a positive and negative line. i have to splice the old line and new one and then connect them and the tape em. the part that connects to the speakers isnt connected right now. i put those one once i get the wires together.


http://www.walmart.com/ip/Sony-Xplod...akers/14956453


those are the ones i got.

cgbozz37

Just test the speakers. Hook it up both ways. if its wrong it will sound different from your front speakers. I always have the same problem because no car companies use same wire color codes.

rtralabama

i did that. one of them worked the other didnt so i switch wires and they work lol. thanks now i have rear speakers again!