Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

somethings wrong

Thread Tools
 
Search this Thread
 
Old Mar 6, 2010 | 07:27 PM
  #1  
tcountry's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2009
Posts: 95
Likes: 0
From: Western Colorado
Year: 1988
Model: Cherokee
Engine: 4.0l
Default somethings wrong

Ok I'll try to xplane this good. So when you turn the headlights on the left turn indicator light comes on and stays on, not the outside lights just the indicator, when you turn the blinker on the outside lights stay on and dont flash. when the headlights are off the indicator only comes on when you do the blinker but i still doesnt flash. the right side works fine it flashes, and the light only comes on when it's suppose to, does anyone know whats going on. Is it the headlight switch or the turn signal switch or something else, I'm really not sure. Any help would be great
Reply
Old Mar 6, 2010 | 07:30 PM
  #2  
winston427's Avatar
CF Veteran
 
Joined: Feb 2009
Posts: 5,900
Likes: 10
Model: Cherokee
Default

Check all the turn signal bulbs first.
Reply
Old Mar 6, 2010 | 07:33 PM
  #3  
00XJ's Avatar
Senior Member
 
Joined: Sep 2009
Posts: 575
Likes: 2
From: Virginia
Year: 2000
Model: Cherokee
Engine: 4.0 inline 6
Default

If its not the bulbs it could possibly be a relay.
Reply
Old Mar 6, 2010 | 07:36 PM
  #4  
winston427's Avatar
CF Veteran
 
Joined: Feb 2009
Posts: 5,900
Likes: 10
Model: Cherokee
Default

Remember this when dealing with electrical issues on a vehicle.

K keep
I it
S simple
S stupid (not a reference to you)

Always look at the most obvious things first and go from there. Bulbs, flasher relay, grounds, switches.
Reply
Old Mar 6, 2010 | 07:40 PM
  #5  
ol"blue's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 28,068
Likes: 6
From: Tenn. and Mich.
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
Default

Originally Posted by tcountry
Ok I'll try to xplane this good. So when you turn the headlights on the left turn indicator light comes on and stays on, not the outside lights just the indicator, when you turn the blinker on the outside lights stay on and dont flash. when the headlights are off the indicator only comes on when you do the blinker but i still doesnt flash. the right side works fine it flashes, and the light only comes on when it's suppose to, does anyone know whats going on. Is it the headlight switch or the turn signal switch or something else, I'm really not sure. Any help would be great
It's most likely a bad bulb on the left side. They're supposed to be dual filament bulbs. Check them carefully. One is either bad or incorrect, or the socket is bad. IMO
Dan
Reply
Old Mar 6, 2010 | 07:52 PM
  #6  
tcountry's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2009
Posts: 95
Likes: 0
From: Western Colorado
Year: 1988
Model: Cherokee
Engine: 4.0l
Default

I replaced the bulbs yesterday at work, the wires at the bulb have battery voltage and the ground tested good with a wiggle test, I could be wrong but the right flashes so I think that the flasher relay is good, I'm getting power at the light when the switch is on, if a relay was bad i dont think that it would be getting any power, but again this is only a guess, is there any way to test the blinker switch?
Reply
Old Mar 6, 2010 | 07:59 PM
  #7  
ol"blue's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 28,068
Likes: 6
From: Tenn. and Mich.
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
Default

The right side flashes so everything checks out except the left side bulbs as I stated earlier. I went through this several months ago with someone else. They finally checked and the bulbs weren't dual-filament type, and when the correct ones were installed the blinkers worked fine.
Dan
Reply
Old Mar 7, 2010 | 12:26 PM
  #8  
1989cherokee's Avatar
Seasoned Member
15 Year Member
 
Joined: May 2009
Posts: 252
Likes: 2
Year: 1989
Model: Cherokee
Engine: I6 4.0
Default

Originally Posted by tcountry
I replaced the bulbs yesterday at work, the wires at the bulb have battery voltage and the ground tested good with a wiggle test, I could be wrong but the right flashes so I think that the flasher relay is good, I'm getting power at the light when the switch is on, if a relay was bad i dont think that it would be getting any power, but again this is only a guess, is there any way to test the blinker switch?
I would try a new relay. they are like $8. I just replaced mine two days ago because my right blinker would blink twice then just stay on but he left one worked just fine. The new relay fixed the problem.
Reply
Old Mar 7, 2010 | 01:11 PM
  #9  
tcountry's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2009
Posts: 95
Likes: 0
From: Western Colorado
Year: 1988
Model: Cherokee
Engine: 4.0l
Default

Single filament bulb, I'm such a moron
Reply
Old Mar 7, 2010 | 01:12 PM
  #10  
ol"blue's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 28,068
Likes: 6
From: Tenn. and Mich.
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
Default

Originally Posted by tcountry
Single filament bulb, I'm such a moron
I tried to tell you more than once.

Dan
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cr1d3r
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Sep 29, 2020 12:15 PM
wags627
Cherokee Chat
9
May 25, 2020 02:56 AM
RyanHardin1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Sep 10, 2015 08:21 AM
SouthSeaPirate
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Sep 7, 2015 11:29 PM
rdr8887
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Sep 6, 2015 03:39 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 10:42 PM.