Side Molding

Reply Subscribe

Thread Tools

Search this Thread

Mar 31, 2008 | 02:31 PM

BigVaz

Thread Starter

Senior Member

Joined: Jan 2008

Posts: 551

Likes: 1

From: Kenosha, Wi

Year: 2000

Model: Cherokee

Engine: 4.0L I-6

Side Molding

How should i go about removing the molding on the doors? Is it just double side sticky tape? Will it buff out nice after it's off?

Mar 31, 2008 | 02:38 PM

OiRadio47

Junior Member

Joined: Mar 2008

Posts: 40

Likes: 1

From: Mishawaka, IN

Model: Cherokee

i just did mine, and used a heat gun. makes it easy to get the sticky crap off. turned out nice.

Mar 31, 2008 | 02:43 PM

BigVaz

Thread Starter

Senior Member

Joined: Jan 2008

Posts: 551

Likes: 1

From: Kenosha, Wi

Year: 2000

Model: Cherokee

Engine: 4.0L I-6

^^Cool, thats what I wanted to hear. Im gonna take mine off when im ready to get the sides rhino lined.

Mar 31, 2008 | 03:16 PM

xjjeepthing

Short Bus Motorsports

Joined: Mar 2008

Posts: 1,111

Likes: 7

From: Plymouth Indiana

Year: 2001

Model: Cherokee

Engine: 4.0

Yep use a heat gun. Any glue or tape that is left you can use acetone to remove. I did mine last summer.

Mar 31, 2008 | 03:34 PM

ktmracer419

CF Veteran

Joined: Sep 2007

Posts: 4,869

Likes: 14

under mine was rust, and wetness and sticky glue crap, they got torn off accidentally over time though

Mar 31, 2008 | 08:52 PM

rockinxj00

Junior Member

Joined: Mar 2008

Posts: 62

Likes: 0

From: Goshen, Indiana

Year: 2000

Model: Cherokee

Engine: 4.0

be careful. i went to take mine off and i had to stop cuz it started pulling clear coat off.

Mar 31, 2008 | 09:24 PM

BlueXJ

Renix Super Guru

Joined: Mar 2008

Posts: 24,653

Likes: 19

From: In yourz postez fissin jurr spelinzs

Year: 1990XJ/1989MJ

Model: Comanche

Engine: 4.0L Renix

Once you get them off with your wife's hairdryer then snag her nailpolish remover for the sticky stuff. Don't think you will get the clear coat with that.

Side Molding

Side Molding

Trending Topics