Shocks?
CF Veteran

Joined: Oct 2010
Posts: 2,150
Likes: 12
From: Ontario, Canada
Year: 1989 Laredo
Model: Cherokee
Engine: 4.0 L 6 Renix
Monroe Tenneco is a customer of mine. I run Monroe Sensitrac shocks. All stock shock applications work with my 3.5" lift. I use a riser block (check out build on site "GoJeep.com") on the lower bowtie mount of the front shocks, rears are stock mounted although I sacrifce some down travel. (Don't want the extra downtravel without a change to my driveshaft lenght.) Google the Monroe shock site. This time round I used the load assist spring over shocks on the rear as it helps with the weight of the extra stuff in the back. Happy so far. This is second set. Ran 78000 miles on the 1st set and one rear went bad. I watch for the shocks to come on sale. Front pair usually $100. Rear coil overs don't come on sale here, was $175 for the pair. Monroe is my customer, the product does work for me
Old Man Emu have always worked for me, they have a set that works with a 3 to 5" lift. The numbers are N35L and N36L, bought mine from Quadratec for ~88 each.. Also have them on my FJ Cruiser.
CF Veteran
Joined: Aug 2010
Posts: 2,112
Likes: 4
From: Wantage, NJ
Year: 1995
Model: Cherokee
Engine: 4.0 I6
Senior Member
Joined: Nov 2010
Posts: 976
Likes: 5
From: Cloquet, MN
Year: 2000 Ltd.
Model: Cherokee
Engine: 4.0L I6
CF Veteran
Joined: Aug 2010
Posts: 2,112
Likes: 4
From: Wantage, NJ
Year: 1995
Model: Cherokee
Engine: 4.0 I6
https://www.cherokeeforum.com/f2/shocks-77766/
All the info on OME and Monroe, Both owned by Tenneco.
All the info on OME and Monroe, Both owned by Tenneco.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
BlvdKreeper
Cherokee Chat
5
Oct 1, 2015 06:34 AM
her89
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Sep 26, 2015 12:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



