Replacing rear main seal with transmission out

Reply Subscribe

Thread Tools

Search this Thread

Sep 18, 2021 | 02:03 AM

Armen Chorlian

Thread Starter

Newbie

Joined: Jul 2020

Posts: 2

Likes: 0

Model: Cherokee (XJ)

Replacing rear main seal with transmission out

Hi guys,
Currently doing a clutch replacement and have the tranny dropped.
I've heard this is a good time to replace the rear main seal.
I have the engine/oil pan supported on a floorjack as everyone recommends.

My question is how can I support the engine if I'm taking off the oil pan to replace the rear main seal. Is there a better lift point? I don't have a hoist.
Should I just finish the clutch/put the tranny back and do the RMS another time?

Thanks,
newb

99 Jeep Cherokee Sport 4.0L

Sep 18, 2021 | 01:27 PM

lawsoncl

CF Veteran

Joined: Dec 2017

Posts: 4,365

Likes: 1,215

Year: 1989

Model: Comanche (MJ)

Engine: 4.0

I vote for finishing the transmission first, instead of trying to figure out how to support the engine.

Sep 18, 2021 | 05:39 PM

Rogue4x4

::CF Administrator::

Joined: Feb 2011

Posts: 14,479

Likes: 805

From: Blunt, South Dakota

Year: 97

Model: Cherokee (XJ)

Engine: 4.6 stroker

Is your RMS bad?

Sep 18, 2021 | 11:23 PM

tech

CF Veteran

Joined: Jun 2016

Posts: 2,138

Likes: 278

From: Santa Clarita California

Year: 2001

Model: Cherokee (XJ)

Engine: 4.0L

You can support the rear of the engine with a chain and something going across the top of the engine compartment it can be a pipe or some 2x4s . that way you can remove the floor jack .