Sep 10, 2015, 02:29 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Brake Guides
- Jeep Cherokee XJ 1984 to 1996 How to Replace Brake Mater Cylinder
Step by step instructions for do-it-yourself repairs
Browse all: Brake Guides
Replacing Master Cylinder
Thread Starter
Old School CF Moderator
Joined: May 2010
Posts: 9,652
Likes: 3
From: Chattanooga
Year: 2001
Model: Cherokee
Engine: 4.0
Replacing Master Cylinder
I'm replacing the master cylinder on my 88 Xj and decided to make a little write up a long with some pics so you guys can tell me if I'm doing something wrong. I began by removing the two brake lines from the side of the mc. Then proceeded to remove the mc from the booster. I pulled the mc out and here is what I have...correct so far?
Junior Member
Joined: Jun 2010
Posts: 35
Likes: 0
From: Midwest Arkansas
Year: 2000
Model: Cherokee
Engine: 4.0
You're correct so far. Good Job!
Before you install the new master cylinder I would suggest bench bleeding it first. It will save you a lot time bleeding the brakes lines. If you don't know how to bench bleed it just do a Google Search on bench bleeding a master cylinder.
Before you install the new master cylinder I would suggest bench bleeding it first. It will save you a lot time bleeding the brakes lines. If you don't know how to bench bleed it just do a Google Search on bench bleeding a master cylinder.
Thread
Thread Starter
Forum
Replies
Last Post
Zeke P. Lucas
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Aug 30, 2015 05:42 PM
madmanmarty
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
30
Aug 30, 2015 03:17 PM
JWB37
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Aug 29, 2015 12:03 PM
britishcolumbia
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Aug 28, 2015 04:08 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)