When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go hereXJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.
Other than replacing the entire fender, what is the best way to replace the broken studs on the front fenders (the studs that hold the front clip onto the Jeep).
I drilled it out and welded on a new bolt as a stud. In a pinch, you could drill it out and then use one of those dry wall anchor things (https://www.homedepot.com/p/Crown-Bo...0242/100349321. That stud is only needed to hold the header panel in place. I went a few years without a nut on that stud on my 99. Didn't really hurt anything.
Yes. Drilled through and then weld from the back side. It can take awhile to drill through. It's a pretty thick piece of metal on the backside of the fender, just have to be patient. I use antisieze on everything when I put it back together now.
Replace studs on front fenders
