IAC No FAst Idle
#1
Junior Member
Thread Starter
Join Date: Aug 2011
Location: Poconos, USA
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Year: 98
Model: Cherokee
Engine: 4.Ohhhhhhhhhhhhh
IAC No FAst Idle
98 Cherokee 4.0
Trouble Code P0505
I have a bad IAC with no fast idle. You need to give it some pedal to start, Vehicle runs but low idle is a wee bit slow.
I picked up a new IAC from Rock Auto, it's a "Standard Brand" part.
Codes were cleared.
RPM races to 3,000 rpm and won't idle down. I tried driving it to get it to sync with the computer.
Thinking it's a bad IAC from Rock Auto, I picked up a $11 China IAC from Amazon as a check. This China IAC does the same thing.
Put the bad IAC back on it runs but has no fast idle during warm up.
Suggestions?
Trouble Code P0505
I have a bad IAC with no fast idle. You need to give it some pedal to start, Vehicle runs but low idle is a wee bit slow.
I picked up a new IAC from Rock Auto, it's a "Standard Brand" part.
Codes were cleared.
RPM races to 3,000 rpm and won't idle down. I tried driving it to get it to sync with the computer.
Thinking it's a bad IAC from Rock Auto, I picked up a $11 China IAC from Amazon as a check. This China IAC does the same thing.
Put the bad IAC back on it runs but has no fast idle during warm up.
Suggestions?
#2
CF Veteran
Join Date: Oct 2018
Location: Hunt County Texas
Posts: 1,096
Received 164 Likes
on
139 Posts
Year: 1995
Model: Cherokee (XJ)
Engine: 4.0L
Go with OEM (p/n 4874373AB), looks like it's about 100 bucks at an OEM online Mopar parts dealer, can probably find it cheaper. Besides that check for vacuum leaks, make sure the new ones have the o-ring installed, I'd be surprised if an 11 dollar IAC came with an o-ring at all but I dunno.
#3
Seasoned Member
Don't cheap-out with the IAC. Also, take the manifold it bolts to off to clean the seat where the conical portion of the IAC seats. There may be a slight build up of contamination preventing it from fully seating, resulting in a poor idle. Or, taking the throttle body off completely is just as easy and then you can spray it down with cleaner (IAC off). My 98 was not idling properly with a new IAC because of contamination in the manifold it bolts to.
#4
CF Veteran
Join Date: Oct 2018
Location: Hunt County Texas
Posts: 1,096
Received 164 Likes
on
139 Posts
Year: 1995
Model: Cherokee (XJ)
Engine: 4.0L
Don't cheap-out with the IAC. Also, take the manifold it bolts to off to clean the seat where the conical portion of the IAC seats. There may be a slight build up of contamination preventing it from fully seating, resulting in a poor idle. Or, taking the throttle body off completely is just as easy and then you can spray it down with cleaner (IAC off). My 98 was not idling properly with a new IAC because of contamination in the manifold it bolts to.
#5
Junior Member
Thread Starter
Join Date: Aug 2011
Location: Poconos, USA
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Year: 98
Model: Cherokee
Engine: 4.Ohhhhhhhhhhhhh
Thanks for the suggestions, all place have been cleaned, hoses are ok. First IAC I put in was a Standard Motor Parts IAC, they make decent parts. After that gave me a 3000 rpm idle I did buy a cheapy china IAC for a double check. Note withoriginal IAC back in I have normal idle and no fast idle.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
BlueRidgeMark
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
11-06-2013 06:19 PM
Blackwolf
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
12-02-2012 05:05 PM
goneboating06
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
10-18-2010 06:37 PM
Frostracing
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
10-07-2010 07:45 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)