Anyone know how to remove the rear brake junction block that sits on top of the axle (Dana 35) .
I am changing the Heavy Duty springs for normal ones and the flexible brake hose is gonna stretch too far before I can remove the old springs. If I can release that junction from the axle I think there is enough to let the axle drop away.
I can't see any fixings that hold it in place!

 

The 8.25 has a vent line running from the top of the block. Its like a bajo bolt, pull the rubber vent line off and take the banjo bolt off. It will make sense once you pull the rubber vent hose. My friends 98 has a 35 and its the same on that axle.