So i changed a heater core in my 1999 cherokee sport. Put everything back together, and now i have no gauges what so ever, the compass and all the overhead is dead, and the blower no longer works.
yes ive checked all the fuses, relays, and ground points. Also made sure everything was securely plugged in.where do i start?

 

I would start by reading this thread, just the begining and the end though...

https://www.cherokeeforum.com/f2/no-...cement-254762/

summary;..a wire is pinched, or not plugged in

 

I figured thats what it was i was just hoping to find a way to fix it without taking it back apart

 

Unpossible with current technology.

 

So the pinched wire was correct! Think i have a bad blower motor too. The plug in the blower is broken and you can move the prongs around. (There was smoke coming out of the motor)
Are both wires from blower motor supposed to be hot?

 

what year model u got?

if pre 97, every part of the fan wiring circuitry can be toasted by the **** design

I recently posted on how to overcome this

 

O.P. stated it's a 99. However, 97+ is also subject to being toasted by the shi1 design.

 

it was toasted due to **** design lol fixed that and had a trans line issue lol

 

Also fixed trans line issue. Its a semi healthy xj now