Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

random cutting out

Old May 28, 2013 | 12:40 PM
  #1  
monstercherokee's Avatar
Thread Starter
Seasoned Member
 
Joined: Sep 2011
Posts: 474
Likes: 0
From: segoville tx
Year: 1997
Model: Cherokee
Engine: 4.0 6 cylinder
Default random cutting out

Ill be driving and randomly my motor cuts out and jerks but keeps going and its doing it more and more
Reply
Old May 28, 2013 | 12:53 PM
  #2  
mikesignal's Avatar
Senior Member
 
Joined: Aug 2009
Posts: 914
Likes: 14
From: north carolina
Year: 2000
Model: Cherokee
Engine: 4.0
Default

is the check engine light on and if so what codes
Reply
Old May 28, 2013 | 12:57 PM
  #3  
monstercherokee's Avatar
Thread Starter
Seasoned Member
 
Joined: Sep 2011
Posts: 474
Likes: 0
From: segoville tx
Year: 1997
Model: Cherokee
Engine: 4.0 6 cylinder
Default

Originally Posted by mikesignal
is the check engine light on and if so what codes
No check engine light
Reply
Old May 28, 2013 | 01:04 PM
  #4  
cherokee94&99's Avatar
Seasoned Member
 
Joined: Oct 2010
Posts: 329
Likes: 0
From: Pennsylvania
Year: 1999
Model: Cherokee
Engine: chrysler 4.0
Default

Throttle position sensor. When i deployed a few years back, my xj sat for 5 months. When i got back i was driving it and it just cut out for no reason. Since then I've had issues with both my 99 xj's and their TPS sensors. There's two options, get a BWD replacement from a parts store with a warrenty, they typically last about a year. when it goes bad just go to the parts store and swap it out. Or, go to a junkyard and pull an OEM factory one which tend to last longer. Either way if i was having the problem you are having i would replace the TPS because I've had numerous issues that all have been related to a bad TPS, sometimes it throws a code, sometimes it doesn't. Other times it will momentarily throw a code and look like it clears but when you hook up a reader it still shows up.
Reply
Old May 28, 2013 | 01:27 PM
  #5  
RTorrez1's Avatar
CF Veteran
 
Joined: Sep 2011
Posts: 4,172
Likes: 4
From: Riviera, Texas
Year: 1998 Sport
Model: Cherokee
Engine: 4.0
Default

Even though your CEL didn't come on I would still have it check for ant stored codes. Hopefully it can point you in some kind of direction to go before you start throwing parts at it. It can get pretty pricy doing that.

Last edited by RTorrez1; May 29, 2013 at 04:32 PM.
Reply
Old May 28, 2013 | 01:35 PM
  #6  
SilverHaze's Avatar
Banned
 
Joined: Dec 2011
Posts: 222
Likes: 0
From: O. NE
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Crank position sensor. Before I changed mine it would cut out on the interstate and turn itself back on. At red lights it would cut off and it would start back up immediately. After it got very bad I had to wait a few minutes to start back up. No cel.
Reply
Old May 28, 2013 | 04:26 PM
  #7  
monstercherokee's Avatar
Thread Starter
Seasoned Member
 
Joined: Sep 2011
Posts: 474
Likes: 0
From: segoville tx
Year: 1997
Model: Cherokee
Engine: 4.0 6 cylinder
Default

Originally Posted by SilverHaze
Crank position sensor. Before I changed mine it would cut out on the interstate and turn itself back on. At red lights it would cut off and it would start back up immediately. After it got very bad I had to wait a few minutes to start back up. No cel.
New one and it dont die only when my speeds are from 20 to 70
Reply
Old May 28, 2013 | 04:29 PM
  #8  
Turbo X_J's Avatar
CF Veteran
15 Year Member
 
Joined: Sep 2009
Posts: 8,567
Likes: 20
From: ☼ Blackhole Sun
Year: My Jeep is a GMC
Default

It will be less expensive for you in the long run if you have it scanned for codes.
Reply
Old May 28, 2013 | 07:28 PM
  #9  
mikesignal's Avatar
Senior Member
 
Joined: Aug 2009
Posts: 914
Likes: 14
From: north carolina
Year: 2000
Model: Cherokee
Engine: 4.0
Default

when it cuts off do you have power to radio, lights, accessories etc?
Reply
Old May 28, 2013 | 07:34 PM
  #10  
monstercherokee's Avatar
Thread Starter
Seasoned Member
 
Joined: Sep 2011
Posts: 474
Likes: 0
From: segoville tx
Year: 1997
Model: Cherokee
Engine: 4.0 6 cylinder
Default

Originally Posted by mikesignal
when it cuts off do you have power to radio, lights, accessories etc?
It all stays on its just the motor like its a very bad miss and it jerks
Reply
Old May 28, 2013 | 07:44 PM
  #11  
peep's Avatar
CF Veteran
15 Year Member
 
Joined: Oct 2010
Posts: 2,150
Likes: 12
From: Ontario, Canada
Year: 1989 Laredo
Model: Cherokee
Engine: 4.0 L 6 Renix
Default

Ive had the same "cut out" and jerk for 3 years. Some days does it several times per minute, then it totally goes away, then it is back.
Ive tuned the tps and when I play with the revs at park all is good. the Peep does it most at about 90kmph about 55mph. Happens to me rain or shine.
Ive changed all the plugs and wires, rotor, cap, cleaned all grounds, coil contacts clean, no coil cracks. Starts all weather.
My 89 has no codes to throw, and all components and Renix injection is original with over 624000km. Today, pouring rain, 4 hrs driving, not a hickup.
Who is to say what tomorrow will bring. Very annoying not being able to trace the source. I am convinced it is electrical and I suspect the converter lockup is blipping, but not truly sure. I understand your concerns and am also looking for the cause and cure. However as I say about 3 years with the symptom at about 70000 km yearly and no related breakdowns. Certainly open to suggestions.
Reply
Old May 28, 2013 | 08:05 PM
  #12  
mikesignal's Avatar
Senior Member
 
Joined: Aug 2009
Posts: 914
Likes: 14
From: north carolina
Year: 2000
Model: Cherokee
Engine: 4.0
Default

get the codes checked. your local auto parts store will do it for free. you could have a few different issues and you need a clue to narrow it down. otherwise you'll be throwing parts at symptoms and it will cost you more in the long run, just like turbo said.
Reply
Old May 29, 2013 | 11:53 AM
  #13  
98CheapJeep's Avatar
Newbie
 
Joined: May 2013
Posts: 18
Likes: 0
From: Elkhart, IN
Year: 1998
Model: Cherokee
Engine: 4.0
Default

My jeep was doing the same thing. Check your neutral safety switch(PRNDL). There are write-ups here for SAFE removal and rebuilding. If you cant rebuild it I will try and find the link to the page where I got mine for like 1/6th the price of Autozone and Advance.
Reply
Old May 29, 2013 | 11:56 AM
  #14  
98CheapJeep's Avatar
Newbie
 
Joined: May 2013
Posts: 18
Likes: 0
From: Elkhart, IN
Year: 1998
Model: Cherokee
Engine: 4.0
Default

Here is where I got my PRNDL switch from.

http://www.am-autoparts.com/1997/Jee...29/527455.html
Reply
Old May 29, 2013 | 01:59 PM
  #15  
AZ89MJ's Avatar
Newbie
 
Joined: Dec 2012
Posts: 17
Likes: 0
Default

Check to see that you routed the cps wire correctly..... If not the wire can come in contact with the exhaust manifold and melt it... This happened on my 95 xj and when I hit bumps wheeling it would just die on me due to it shorting out on the firewall or manifold....
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:23 AM.