monstercherokee

Radio plug keeps melting and causing interior lights to flicker or go out Idk what's going on please need help!!

91 limited owner

you have a short somewhere in your factory harness. (If that is what you used) Run your pos. power lead from radio straight to the fuse box. With an inline fuse. And neg. power lead from radio straight to ground. If it is after market head unit, Yellow to battery, Red to fuse box, Black to a good ground. I never use the factory harness, And run my own new wires. That way I know what I have. And should a problem arise I know where to look. JMO!

RenixHeep

what amp fuse would you run inline? I need to install my deck and speakers still in my xj, hopefully they still work

Lowrange2

You need to find yourself a good multi-meter and someone that knows how to use it.

Test both power wires for continuity to ground and the same for the ground wire.

You need to fix this before you burn your whole Jeep to the ground.


He needs to fix the problem, not rig some junk up around it.

monstercherokee

I dont kno nothing about all this its getting me pissed off and I don't wanna bother with it

RenixHeep

Think i might know what your problem is, was installing my deck and speakers last night, come to find out, if your butt connectors randomly touch with key on, dash lights flickers, fuses get blown. wrap all your butt connectors with electrical tape to make sure they aren't touching, and go from there

cruiser54

http://snowboard247.blogspot.com/200...ring-info.html