Freegdr, the radio is not in yet. Waiting on the part...

 

Getting to work!

 

You got both wiring papers ?

 

And this, the jeep 93-94 car stereo wiring end of things, so yo know where to connect wat:

http://www.the12volt.com/installbay/...tail/1152.html

 

...referring to the diagrams? Neither harness (factory or vehicle specific) have the brown and pink wires. Here's a pic...

 

Think she bought the adapter its plug and play into factory radio plug .

 

Forget about xj harness the pc you got came with directions for what colors do what for white plug correct ?

 

My son cut the wires down on both so he bought 2 new adapters. The new adapters don't match the diagram on the box. The brown and pink are missing. Does that matter.

 

Ahh...Well, ok, this is where my car stereo install know-how contribution ends haha.

 

Just match what colors are for on both plugs.
.

 

...late but I have my son matching colors.

 

Okay he got it got it started. Now, we don't have a soldered will the wire tape be sufficient?

 

Not really advisable except for testing, if one works its way out, it could short on something and that usually doesnt end well. Get some heatshrink while you are at it (if you need a soldering iron, harbor freight has everything you would need for cheap).

What do the two unused wires correspond to? They might be something like power antenna and illumination/dimmer (of which the XJ has neither wire from the factory), so you can usually disregard those. My Metra harness came with a table of which wire does what, but the actual harness is still universal to "Chrysler".

 

Butt connectors and crimping tool will suffice.
.

 

...a butt connector?