plastic nut inserts for replacement grille/header panel?
#1
Newbie
Thread Starter
Join Date: Jun 2012
Location: Dublin Texas
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
plastic nut inserts for replacement grille/header panel?
I bought a replacement header panel from a1auto. It has the holes for the little plastic nuts that the screws that hold the blinker lights on. There is a square indentation in the plastic to keep a nut from turning. The old header has little white plastic inserts in it. What are they called called and where can I get them? The ones on the old grille were damaged/missing from the wreck.
Thanks
i_r_
Thanks
i_r_
#2
Beach Bum
Not sure what they are called but have seen them at ACE Hardware in the slide out boxes of automotive fasteners.
Also NAPA.
Also NAPA.
#3
Senior Member
Join Date: May 2014
Location: Colorado
Posts: 672
Likes: 0
Received 4 Likes
on
4 Posts
Year: 2001, 1997
Model: Cherokee
Engine: 4.0L
The local ACE by me has the best selection for this type of stuff. Auto Zone and others may have it too, but if they don't they say go to ACE. I would go to ACE first if there's an appreciable distance between them.
#5
Newbie
Thread Starter
Join Date: Jun 2012
Location: Dublin Texas
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
For documentation purposes that hopefully will help some other poor soul in the future......
.164" (6mm) plastic "j" nut 6035 657, 50 cents each at dodge dealership
.164" (6mm) plastic "j" nut 6035 657, 50 cents each at dodge dealership
Thread
Thread Starter
Forum
Replies
Last Post
tracyk
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
08-04-2021 07:26 AM
Zeke P. Lucas
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
08-30-2015 05:42 PM
SlickXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
08-29-2015 09:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)