Plastic elbows in valve cover....
I have a '94 .... Most of all the plastic/composite in the engine bay is failing.
Any source for this stuff ??
Or just replace with SBC style grommets or what ?
Any source for this stuff ??
Or just replace with SBC style grommets or what ?
Newbie
Joined: Sep 2011
Posts: 19
Likes: 0
From: Wilmington NC
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Recently the rubber fitting (connects into the elbow) on the ccv vent tube coming off the back outlet of my valve cover had failed. After checking the parts stores with no luck, I ended up at the dealership. A whole new vent tube ran me around 20 bucks, but that included a second smaller tube that I replaced while I was at it. I saw some questionably good replacements at the local bone yard but didn't want to take a chance on that particular piece. Dunno about any of the of the other plastic stuff, but will be finding out soon myself...
Seasoned Member
Joined: Oct 2009
Posts: 416
Likes: 0
From: Tucson AZ
Year: 94
Model: Cherokee
Engine: 4.0
I picked up ccv, elbow and grommets at oreilys. They didn't list grommets for the XJ, but i went over to the help section and there was one that said it was for a chyr and it fit perfect.
Thread
Thread Starter
Forum
Replies
Last Post
bradleyheathhays
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Oct 21, 2024 09:27 AM
sluger17
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Jul 8, 2023 07:08 AM
MightyMouse8
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
Oct 8, 2015 08:57 AM
DieselDaze
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Sep 30, 2015 06:42 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



