redbullmorton

I have 85' 4door, and the driver rear door hing pin has wore through, who sells one and how to remove old one. I tried using a punch to drive old one out, no luck.

ANYONE ELSE EVER HAVE ANY LUCK REMOVING ONE?

F1Addict

Does it look like this?

redbullmorton

maybe, I can't get it out, I only see the top and its flush with the door hindge. I can tell its a hollow tube with a split down one side,

so how do you remove old one, and is new one a dealer only Item?

jhampton

great time to do the removable door upgrade! well if you dont want to do that.. try spraying some PB down it and let it set for a day then spray it again then use a small pocket screw driver (flat blade) then get on the edge of the pin and tap it out.

Fsher21

Try to tap it up from the bottom. The door will torque on the pin at some positions making it hold tighter iirc. You can either replace it with a bolt that fits, or take the pin from another door and replace that one with a bolt. That solves the loud pop click pop sound every time it opens/closes lol.

marshalXJ

Hit with a small hammer from the bottom till it wont go farther then hit it with a screw driver and hammer from the bottom if it's the pin in the picture took mine out today to do the removable door app

F1Addict

The pin in the photo I posted is from the door index stop, not the hinge, itself. If this is what's broken in yours, shoot me a PM with your address and I'll mail you the one in the picture. I've got an extra.

Firestorm500

The pin is on national backorder from Jeep. I wouldn't count on it being available anytime soon--maybe never,

GRANDLICH

Well that sucks I was going to go down to the dealer tuesday and order one..

dirtyRHD

junk yards guys i bought the whole hinge Assembly that goes in for ten bucks. i need the pass side since mine is rhd and it was in the first jeep i looked at. my is also a 96 and the one i got is out of an 88 so i dont think they ever changed dramatically

Firestorm500

The retainer pin was the same 84-01.

Brambles

Anyone have a part number or something for the correct pin, my 1993 has some slight wear on the drivers door that I want to tighten up, don't want to go doorless.

I can't seem to find a pin for this door anywhere, they list parts for the Grand cherokee's and the XJ's after the hinge redesign but nothing for the early year to about 1996 ish

Some help would be appreciated if someone knows the fix for this!!

thanks

ZINGGG

http://www.quadratec.com/products/55014_8203.htm

freegdr

Wrong pin guy its a hinge pin hes needing i got mine from a 4dr from the rear doors alot less used .

ZINGGG

Ahh I see. Ignore that then