Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Overhead Console Retrofit

Thread Tools
 
Search this Thread
 
Old May 18, 2011 | 10:30 PM
  #1  
99Classic's Avatar
Thread Starter
Seasoned Member
 
Joined: Dec 2010
Posts: 402
Likes: 2
From: Charlotte/Raleigh, NC
Year: 1999
Model: Cherokee
Engine: 4.0 MPI
Default Overhead Console Retrofit

Just swapped an overhead console out of a 98 XJ into my 99. I managed to get the wiring connected and everything works except the clock. When it comes on but it just counts up and then eventually stopped on an incorrect time. Do yall think i have a wire crossed or do I just need to set it? Is there any way to set the clock on the console?
Reply
Old May 18, 2011 | 11:39 PM
  #2  
goalieman24's Avatar
Member
 
Joined: Jan 2009
Posts: 192
Likes: 0
Default

It's because that's not a clock.

It's basically just a timer that keeps track of whatever you may need it for. I never really found a use for it myself... I just kept mine on the temp or DTE.
Reply
Old May 20, 2011 | 12:53 AM
  #3  
99Classic's Avatar
Thread Starter
Seasoned Member
 
Joined: Dec 2010
Posts: 402
Likes: 2
From: Charlotte/Raleigh, NC
Year: 1999
Model: Cherokee
Engine: 4.0 MPI
Default

That makes more since! Thanks
Reply
Old May 22, 2011 | 04:07 PM
  #4  
preppye's Avatar
Member
 
Joined: Mar 2009
Posts: 249
Likes: 1
From: Punta Cana , Dominican Republic.
Year: 1988
Model: Cherokee
Engine: 4d56td
Default

hi , i dont think there is no clock either , i installed mine on my jeep and had outside temp , compass , and estimated gas consumption , i didnt connect that of course but basically thats it i also put some led lights on it ...
Attached Thumbnails Overhead Console Retrofit-img-20110430-00085.jpg   Overhead Console Retrofit-img-20110430-00086.jpg   Overhead Console Retrofit-p1020848.jpg   Overhead Console Retrofit-p1020839.jpg  

Last edited by preppye; May 22, 2011 at 04:11 PM. Reason: pics
Reply
Old Jul 26, 2011 | 02:42 PM
  #5  
vazquezjavi's Avatar
Junior Member
 
Joined: Jul 2011
Posts: 71
Likes: 0
From: Desoto, tx
Year: 2000
Model: Cherokee
Engine: 4.0
Default

Is the wiring already up there for the console or will u have to run new wires? Has anyone seen a write up about it?
Reply
Old Jul 26, 2011 | 04:35 PM
  #6  
trans_am7935's Avatar
CF Veteran
 
Joined: May 2009
Posts: 1,844
Likes: 4
From: Glen Burnie, MD
Year: 1994
Model: Cherokee
Engine: 4.0 H.O. K&N, Borla headers, custom down pipe, magnaflow hi-flo cat, flowmaster to turn down tip
Default

so any year cherokee overhead console will fit any year XJ? if so is there a write up on it?
Reply
Old Jul 26, 2011 | 06:05 PM
  #7  
Zack92MJ's Avatar
CF Veteran
 
Joined: Jun 2011
Posts: 2,460
Likes: 0
From: Dayton, Ohio
Year: 1992
Model: Comanche
Engine: 4.0
Default

I also wanna know if theres a write up on it, and does anyone know if theres a write up for the addition of rear speakers?
Reply
Old Jul 27, 2011 | 11:04 AM
  #8  
MooreALX's Avatar
Junior Member
 
Joined: Feb 2011
Posts: 57
Likes: 0
Year: 1995
Model: Cherokee
Engine: 4.0L I6
Default

Originally Posted by Zacks98
I also wanna know if theres a write up on it, and does anyone know if theres a write up for the addition of rear speakers?
I just did this about a month ago, I pulled one from a '98 to put in my '00. The overhead console changed in '97, and personally I wouldn't mess with trying to put the older style in the newer or vise-versa. I did notice that the connector for the wiring harness varied slightly from the two years that I did, but nothing a little solder can't patch through... I found this thread and web site very helpful.

http://www.go.jeep-xj.info/HowtoOverheadConsole.htm

https://www.cherokeeforum.com/f67/ov...rite-up-94597/
Reply
Old Aug 29, 2014 | 09:19 PM
  #9  
pokerrus78's Avatar
Newbie
 
Joined: Aug 2014
Posts: 2
Likes: 0
Model: Cherokee
Default

Do you have pictures of how you wired up the colors at the fuse box on the passenger side kick panel? If you could post some pictures or a wire diagram that would be amazing. I recently purchased a 98 overhead unit and can't get it wired up in my 99 sport. I have looked all over the internet and can't find any help.
Reply
Old Aug 29, 2014 | 09:29 PM
  #10  
XJwonders's Avatar
CF Veteran
Premium Member
 
Joined: Jan 2013
Posts: 19,219
Likes: 45
From: west chester, pa
Year: 1999
Engine: 4.0
Default

The thread is over three years old lol
Reply
Old Aug 30, 2014 | 09:45 AM
  #11  
Fred/N0AZZ's Avatar
CF Veteran
 
Joined: Jul 2013
Posts: 7,554
Likes: 17
From: Monett, MO.
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Been looking for one myself, thanks for the links and the years needed for the console swap.
Reply
Old Aug 30, 2014 | 11:06 AM
  #12  
pokerrus78's Avatar
Newbie
 
Joined: Aug 2014
Posts: 2
Likes: 0
Model: Cherokee
Question

Originally Posted by XJwonders
The thread is over three years old lol
This is the only thread that was even this recent and specific for 98 unit in 99 Cherokee retrofit. Do you happen to have the proper hookup necessary to get this working?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Freda L. Worley Harris
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
7
Feb 15, 2020 04:37 PM
Brandonrcm
Accessories
10
Dec 2, 2015 07:48 PM
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Oct 2, 2015 08:04 PM
Cherokee_of_Tennessee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Sep 30, 2015 12:10 PM
Snajo
Other Vehicles. Other Jeep models & cars and trucks of other makes
0
Sep 26, 2015 11:54 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 07:49 AM.