oldguy52

It's been so long since I dismantled two XJs to build one (like 2 1/2 years) I can't remember how this goes.

The end of the seat belt opposite the retractor on the drivers side doesn't have a threaded hole. The passenger side has metal threaded insert in the body for the bolt to thread into but the drivers side has a plastic POS that looks like this.


Here it is pried out.




It's nothing that would hold a bolt and I cannot figure from the box that I put all the seatbelt parts in how this it's supposed to get mounted properly.

What am I missing?

The rear seat is the same way. Threaded metal insert on passenger side. Plastic POS on drivers side. The 94 I parted for some of the build is the same way. I don't remember doing anything other that removing the bolts.

Appreciate any insight or experience.

oldguy52

Nobody got any info on this?

oldguy52

Never mind. Just pulled the back seat out of the shed to line up a few more things and had my Ah-Hah moment. Sorry I didn't get that sooner. The beauty of a two door.