oil pan
06-21-2009, 07:52 PM
#2
Senior Member
Join Date: Jan 2009
Posts: 920
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0
jack up the truck and let suspension droop all the way then unbolt oil pan and put on a new one make sure to use a new gasket and may i ask why are you replacing the oil pan
06-22-2009, 08:03 PM
#4
Senior Member
Join Date: Jan 2009
Posts: 920
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0
unless the rust is al the way through just take off the pan sand it down and repaint it with some high temp paint the heat from the exhaust has a tendency to cause the paint to peel off and that leads to rust
06-22-2009, 08:04 PM
#5
Seasoned Member
Join Date: Oct 2008
Location: Vail, CO
Posts: 287
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0
why do you need to jack it up to replace the oil pan? just unbolt it and let it drop. if its rusted and bolts twist off then you are gonna have to drill and rethread them unless to you enough thread showing to get a grip on them.
Thread
Thread Starter
Forum
Replies
Last Post
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
17
11-26-2015 12:04 AM
Hole Punchn Hog
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
10-07-2015 08:05 AM
jeepnewbie44312
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
24
09-28-2015 06:04 AM
Dr.Capacitor
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-25-2015 03:02 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)