oil filter
Thread Starter
Member
Joined: Mar 2010
Posts: 241
Likes: 0
From: Chambersburg,PA
Year: 1994
Model: Cherokee
Engine: 4.0
I know this may sound dumb, but is there a trick to getting it off? I've tried everything I know and it still wont come off. It's a 94 XJ Cherokee
Senior Member
Joined: Mar 2009
Posts: 688
Likes: 0
From: Owensboro, Ky.
Year: 1998
Model: Cherokee
Engine: 4.0 liter
get an aluminum bar or some sort of longer bar put over handle of oil filter wrech and have it about 2 to 3 or 4 foot long and uses that as a cheater bar. I had to use it a couple of weeks ago. turn towards driver side when pushing. push towards drivers side. TAKE YOUR TIME AND HAVE THE WRENCH CLOSE TO THE OIL ADAPTER .
Seasoned Member
Joined: Mar 2010
Posts: 358
Likes: 0
From: West Haven, CT
Year: 2000
Model: Cherokee
Engine: 4.0L
If you're using one of the metal strap style oil filter wrenches, try wedging a piece of heavy grit sand paper between the wrench and the filter. This gives some bite on slippery/over tightened filters.
Trending Topics
CF Veteran
Joined: Jan 2009
Posts: 1,964
Likes: 6
From: Baltimore, Maryland
Year: 1994 1993
Model: Cherokee
Engine: 4.0
Not to sound smart or anything but, you are turning it the right way arent you? Other than that I agree they are always a pain and require some leverage. That being said I advise against the hammer/screwdriver thru the center method on this particular filter as sooner or later that`s going to cause the oil filter adapater gasket to leak. And if you think getting the filter off is tough that adapter gasket on the '94 is a pain
Thread
Thread Starter
Forum
Replies
Last Post
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
Feb 28, 2016 02:05 AM
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
22
Sep 13, 2015 06:06 PM
Azzy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Sep 8, 2015 10:49 PM
ARCH4NGEL_II
Modified XJ Cherokee Tech
0
Sep 7, 2015 12:18 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



