I'm trying to figure out the part number for the o-rings on the oil filter adapter for my 1995 XJ 4.0L. Have a small leak coming from the adapter.

Is the correct part number: 1-04720363

Thanks!

 

should be,,read this. part #1-04720363 for a 95 Cherokee XJ.

http://jeep-xj.info/HowtoOilAdaptorOrings.htm

 

For what it's worth, here's the sizes>

91-01 HO Model Orings

0.676 x 0.070 AS568 size -017
0.859 x 0.139 AS568 size -212
2.484 x 0.139 AS568 size -230

 

usually cheaper to get them from someone like crown instead of a dealership

 

04720363 is the part number from the dealership. At least for what I got. All 3 rings. Paid like $11.

 

There's a "guy" on comanche forum that sells kits for 5$ shipped.

 

Can you either post or PM me the link, thanks man!

 

Don't go cheap get the kit from the dealership and then you know it has the proper material to withstand the heat and oil. The kit also comes with all the O-rings that you need. Believe me cheap may means that you are going to do it all over again in the near future. It is good insurance for only a few bucks more.

 

It's only like $11. And yes it comes with all 3 o rings.

 

my jeep dealership wanted $21 for the 2000 kit

 

I agree

 

Just ordered the set from Crown a couple days ago for $1.99. CRO4720363 was their part number. I ordered through 4wd Hardware. I was thinking of getting the Mopar set from the stealership but they wanted $20 for the set. If these show to be crappy I'll suck it up and get the Mopar set.

 

Let me know how those work out for you! I found those online last night, but I'm not sure if I should just go with the mopar ones.

 

Posters have been happy with the kit from Crown Automotive-33002970K , but that's for 87 to 90 RENIX only.

 

Geez.