OBD II scan tool
#1
CF Veteran
Thread Starter
Join Date: May 2010
Location: Western Michigan
Posts: 1,680
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1993
Model: Grand Cherokee
Engine: 4.0l inline 6
OBD II scan tool
2000 Cherokee, I-6, 4.0 L, AW-4
I'm replacing an engine in my jeep. The donor engine is older (year unknown) but it did have a distributor. I have already found the TDC and have installed the Oil pump drive and the Cam shaft posistion sensor. The book tells me that after I have installed the engine I need to verify the correct rotational posistion of the oil pump drive. To do this they say I need a DRB scan tool, well I don't have a few thousand dollars to purchase this tool.
Will a OBD II scan tool acomplish the same thing? I was looking at this;
I'm replacing an engine in my jeep. The donor engine is older (year unknown) but it did have a distributor. I have already found the TDC and have installed the Oil pump drive and the Cam shaft posistion sensor. The book tells me that after I have installed the engine I need to verify the correct rotational posistion of the oil pump drive. To do this they say I need a DRB scan tool, well I don't have a few thousand dollars to purchase this tool.
Will a OBD II scan tool acomplish the same thing? I was looking at this;
#2
Senior Member
Join Date: Jan 2011
Location: Upstate N.Y
Posts: 689
Likes: 0
Received 1 Like
on
1 Post
Year: 2000.1999,1996
Model: Cherokee
Engine: 4.0
Diesil might know this for sure if he is all that ASE patch mechanic so he should have a better idea. To bad you dont know anybody with one, wish you were closer I could help you out, but try asking Diesil.g/l
Thread
Thread Starter
Forum
Replies
Last Post
sluger17
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
07-08-2023 07:08 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)