NP 231 swap
03-23-2018, 02:09 PM
#1
Newbie
Thread Starter
Join Date: Mar 2018
Location: EL DORADO,CA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1985
Model: Cherokee(XJ)
Engine: 2.8l
NP 231 swap
I have n 1985 Cherokee Chief and the front axle was change from the 2 piece shaft on the passenger side with vacuum to engage it, to a 1 piece on the passenger side. I have an NP 231 to put into it, because the old TC went bad. Will the NP231 work okay with the front axle having been changed, or will it not because of the axle not having the vacuum engage/disengage? It has the stock open diff with 31's. I'm pretty sure the 231 was used in later model XJ's and YJ's that didn't have the vacuum disconnect.
Thread
Thread Starter
Forum
Replies
Last Post
bubbarules1958
Modified XJ Cherokee Tech
6
11-17-2013 09:44 AM
DSMXJcrazy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
01-09-2010 01:00 AM
jusper88
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
10-10-2009 02:27 PM
tsconver
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
04-14-2008 11:18 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)