No blinkers/hazards working
#1
Junior Member
Thread Starter
Join Date: Feb 2013
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
No blinkers/hazards working
My blinkers and hazards worked fine this morning and when i left for work this afternoon i clicked them on and had nothing the green arrows on the cluster dont even come on anymore any suggestions?
#3
Seasoned Member
Join Date: Feb 2013
Location: Northern Michigan
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 V6
Turn signal relay. Its like $20 located under the drivers side dash, pop the lower panel under the steering column off.
Trending Topics
#10
Seasoned Member
Join Date: Feb 2013
Location: Northern Michigan
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 V6
Yeah should be that one. If it was under the column. Can't remember what other ones are under there. Mine is going out as we speak just haven't done it and the wife's 99 did the same thing last year. Take that one in and have the part number ran/cross referenced.
#13
CF Veteran
Put the 4 ways on and wiggle test the wiring around the fuse box and relays to see if there is a loose connection. They will turn on when you hit the right spot and then you will know where the problem is.
Also check around the plug on the fire wall. You can bang on it with your hand and move the wires around.
I've found that plug to be a common culprit for electrical issues.
Also check around the plug on the fire wall. You can bang on it with your hand and move the wires around.
I've found that plug to be a common culprit for electrical issues.
#14
Seasoned Member
Join Date: Feb 2013
Location: Northern Michigan
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 V6
Yeah multifunction switches are pricey, not had to switch though. Hope ya get it figured out, that relay did it for me...