t_sparrow

what are some good headlights other than the replacement oem. I want some halogen or hid.

Xj88

If you want something better then you need to start by replacing the entire stock headlight harness.

mehoff_400

look up H4 upgrade... money well spent HID not needed

t_sparrow

where can I buy the upgrade headlight harness?

cruiser54

http://www.eautoworks.com/Putco-H4--...s-PRD7540.aspx

PNWjeeper

Definitely go with the harness. If you do decide to go with HID's do it smart. Here's a link with some great advice.
https://www.cherokeeforum.com/f51/he...grades-151217/

HudsonN

I just did this upgrade.

Buy all of this and you will be set. Cost under $100 and is truly amazing.

Harness ($26.59) -
Headlights ($8.98 for both) -
Headlight Housings ($37.95) -
Total: 73.52. (Plus 5.99 shipping for the housings).

Total with Shipping - $79.51.

It's totally worth it.

You can even get brighter bulbs, but the 50/60W are a HUGE difference. Go for it. You will be amazed.

taythegibs

this, i still dont have the harness (waiting on a paypal claim to go through from a seller who decided i didnt get to get what i ordered) but just the housings and bulbs makes a world of difference, the only thing i dont like about the housing is that there is a dead spot about 15 ft in front of my jeep in the center. also when i get new bulbs im planning on stepping up to the 100/55w bulbs only reason i didnt already is my dispute with the harness.

cruiser54

Originally Posted by xjsnake
https://www.cherokeeforum.com/f2/headlights-151196/index2/ - post2069179https://www.cherokeeforum.com/f2/headlights-151196/index2/ - post2069179

Upgraded headlights the legal (ish) way...

1) Get a new headlight harness.

You can make your own
http://www.go.jeep-xj.info/HowtoHeadlightLoom.htm

Or you can buy one: http://www.eautoworks.com/Putco-H4--...s-PRD7540.aspx

The eautoworks harnesses used to be quite cheap until everyone on this forum started recommending them and the price was raised accordingly.

You can pick them up for $29.99 here http://www.lmctruck.com/icatalog/csd/full.aspx?Page=48 part number 36-3580. It says it fits a chevy blazer but it's the same as the eautoworks harness and I'm running the LMC harness in my XJ.

There are other more expensive options for pre-made harnesses but I'm not super familiar with those.

2) Upgrade to H4 housings

There are two types of regulations pertaining to headlight housings. There are DOT approved housings which are legal in the US and there are Ecode lights which are European housings and aren't legal in the US although many people use them as they are considered superior housings due to the light pattern.

DOT
Rampage http://www.quadratec.com/products/97009_501.htm
IPF http://www.quadratec.com/products/97017_1600.htm
Delta http://www.quadratec.com/products/97009_121.htm
Hella http://www.quadratec.com/products/97009_02.htm

Ecode
Autopals (look on ebay for Autopal 200mm H4 housing)
Hella http://www.rallylights.com/detail.aspx?ID=744
Cibie http://www.clearcorners.com/products/cibie/

Personally I won't buy housings that have plastic lenses, I much prefer glass but your mileage may vary.

3) Get good bulbs

Some of the above housings come with bulbs included with them. I tend not to recommend bulbs as the choices are extremely vast and everyone has their own preferences as to color and wattage.

4) Aim your headlights properly!

I can't say enough how much improperly aimed headlights annoy me on the road plus you are wasting all that time and effort to upgrade the lighting if you don't aim the light where it does the most good... http://www.naxja.org/forum/showthread.php?t=78017

5) On HID Lights

I do not recommend HID's for use in XJ's... People will show links to cheap HID kits and "Projectors" off of ebay and other sites which will give you a lot of light and will also throw a lot of light in all directions making you very visible to police and possibly blinding other drivers.


Read http://www.danielsternlighting.com/t...nversions.html for a well written description of the problems with HID kits.

When using HID's you need a true projector housing. I'm sure people will chime in and say they run HID's and ebay housings and have had no problems but I'm describing the legal (ish) way.

If you want to go down the road of HID's, take a look at what true projector housings cost http://www.kbcarstuff.com/6054-200mm...-p/xd-6054.htm
http://www.brightheadlights.com/hid-upcoming.htm
or you can buy the projectors and retrofit them into existing housings if you are so inclined: https://www.cherokeeforum.com/f58/hea...9/#post1391556

There are a myriad of options available to consumers with the limiting factor being cost. One can spend under $100 and have significantly upgraded their lighting or they can spend $1000 and upgrade their lighting more. It's all in how much money you want to spend.

For those wanting to do some of these upgrades but not necessarily all I would do them in the following order:
1) Headlight Harness (major improvement even with sealed beams)
2) Housings and Associated Bulbs
3) Hid and Projectors (Cost prohibitive to do correctly)


For installation of the harness and housings see this excellent write up: https://www.cherokeeforum.com/f59/my-h4-upgrade-114440/

Disclaimer: Always check your local and state laws as some places have more stringent lighting laws than others... I am in no way associated with any of the above companies and none of what I say should be taken as the absolute truth or only way to do things. Flame on...