Need Help! Jeep Won't Stay Running
OK so I replaced my cracked flex plate. The vehicle is a 4X4 99 Cherokee Sport with the 4.0 and I replaced the Flexplate with a Pioneer FRA-480 from Rockauto. I took out the CPS switch PRIOR to removing the transmission so I don't think its that. Without giving it gas she just stumbles and dies almost immediately when I do give her gas she stumbles and the idle fluctuates up and down. On a good note I no longer have the cracked flexplate noise. Also, I've lost my OBD reader otherwise I would have just read the codes. BTW there appears to be two sets of holes to mount the CPS I used the set farther to the right. Could that be a problem?
OK so I replaced my cracked flex plate. The vehicle is a 4X4 99 Cherokee Sport with the 4.0 and I replaced the Flexplate with a Pioneer FRA-480 from Rockauto. I took out the CPS switch PRIOR to removing the transmission so I don't think its that. Without giving it gas she just stumbles and dies almost immediately when I do give her gas she stumbles and the idle fluctuates up and down. On a good note I no longer have the cracked flexplate noise. Also, I've lost my OBD reader otherwise I would have just read the codes. BTW there appears to be two sets of holes to mount the CPS I used the set farther to the right. Could that be a problem?
Thread
Thread Starter
Forum
Replies
Last Post
Junkyard Cars
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Jun 30, 2014 12:57 PM
crissymn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Jun 27, 2013 10:10 PM
gwthamm
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Jun 9, 2010 09:32 PM
nmcommando
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
May 1, 2010 09:31 PM
getblown5.9
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
May 19, 2009 07:03 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



