Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Name that Part - Lower Panel

Thread Tools
 
Search this Thread
 
Old Jul 5, 2023 | 10:08 AM
  #1  
bpm123's Avatar
Thread Starter
Junior Member
5 Year Member
 
Joined: Mar 2018
Posts: 96
Likes: 6
From: Houston, TX
Year: 1996
Model: Cherokee (XJ)
Engine: 4.0
Default Name that Part - Lower Panel

I looked this part up in the parts manual and it is called a lower panel (for intstrument cluster). Searched for one on ebay and other - no luck.
Is there another more "common" name for it?
If there is way to repair that would be great. I am experiencing several issues(see blue marks). If I could repair that far left I might reduce a lot of the creeks and groans while driving. Any exerpience with this? Thinking maybe epoxy but it would be right at a stress point.

Please comment any idea especially if you have experience.


Lower Panel with issues
Reply
Old Jul 5, 2023 | 10:33 AM
  #2  
dmoe69's Avatar
Senior Member
5 Year Member
Liked
Loved
Community Favorite
 
Joined: May 2021
Posts: 561
Likes: 112
From: Western Washington
Year: 1988
Model: Cherokee (XJ)
Engine: 4.0L
Default

Looks like "Lower dash trim panel" will get you results on eBay.
Reply
Old Jul 5, 2023 | 10:34 AM
  #3  
bluejeep2001's Avatar
CF Veteran
5 Year Member
Liked
 
Joined: Dec 2016
Posts: 1,763
Likes: 419
From: Long Island, New York
Year: 2001
Model: Cherokee (XJ)
Engine: 98 stroked 4.7
Default

If you remove it, there might be part numbers stamped somewhere on the inside
Reply
Old Jul 5, 2023 | 10:41 AM
  #4  
That Jeep Guy XJMJ's Avatar
CF Veteran
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Jun 2009
Posts: 2,611
Likes: 447
From: Michigan
Year: 1987 MJ, 1973 J2000, 1986 XJ, 08 JK
Model: Comanche (MJ)
Engine: 4.0L H.O
Default

"Lower dash panel" "bottom dash trim" don't know the official term for it but how your describing it should find you results.

As for the repair of the mounting holes, ive seen all kinds of creative repairs with plastic, epoxy etc types of glues and ive seen some repairs with thin sheet metal and etc glues or extra fasteners.

Because it's the back side of the panel that gives out I prefer the method of longer fastener and fat head washer. I forget the actual screw size but maybe a #6? And then add a washer that the screw wont pass through. Its not as clean a finish when its done but it sure wont gove out so easy.

Otherwise any 86-96 lower dash panel will fit in place of it. I may have 1 or 2 laying around if you don't mdon'paying a little cash and the cost of shipping.
Reply
Old Jul 5, 2023 | 12:44 PM
  #5  
jakeepoo3's Avatar
Junior Member
 
Joined: Apr 2023
Posts: 65
Likes: 10
From: Ozarks national forest, Arkansas
Year: 1994
Model: Cherokee (XJ)
Engine: 4.0
Default

Originally Posted by bpm123
I looked this part up in the parts manual and it is called a lower panel (for intstrument cluster). Searched for one on ebay and other - no luck.
Is there another more "common" name for it?
If there is way to repair that would be great. I am experiencing several issues(see blue marks). If I could repair that far left I might reduce a lot of the creeks and groans while driving. Any exerpience with this? Thinking maybe epoxy but it would be right at a stress point.

Please comment any idea especially if you have experience.


Lower Panel with issues
Keep the broken piece of plastic. Weld it back to the the panel from the back side with a soldering iron. If you're the type that is skilled at everything you do 👽
Reply
Old Jul 5, 2023 | 03:18 PM
  #6  
Saudade's Avatar
CF Veteran
5 Year Member
Veteran: Air Force
Community Favorite
 
Joined: Aug 2020
Posts: 2,153
Likes: 585
From: SoCal
Year: 1988
Model: Cherokee (XJ)
Engine: 4.0L
Default

"Officially" - P/N 5EY2 4SY6

https://www.moparpartsgiant.com/part...~5ey24sy6.html
Reply
Old Jul 6, 2023 | 12:34 PM
  #7  
bpm123's Avatar
Thread Starter
Junior Member
5 Year Member
 
Joined: Mar 2018
Posts: 96
Likes: 6
From: Houston, TX
Year: 1996
Model: Cherokee (XJ)
Engine: 4.0
Default

Thanks. - very helpful
Reply
Old Jul 6, 2023 | 12:35 PM
  #8  
bpm123's Avatar
Thread Starter
Junior Member
5 Year Member
 
Joined: Mar 2018
Posts: 96
Likes: 6
From: Houston, TX
Year: 1996
Model: Cherokee (XJ)
Engine: 4.0
Default

Originally Posted by That Jeep Guy XJMJ
"Lower dash panel" "bottom dash trim" don't know the official term for it but how your describing it should find you results.

As for the repair of the mounting holes, ive seen all kinds of creative repairs with plastic, epoxy etc types of glues and ive seen some repairs with thin sheet metal and etc glues or extra fasteners.

Because it's the back side of the panel that gives out I prefer the method of longer fastener and fat head washer. I forget the actual screw size but maybe a #6? And then add a washer that the screw wont pass through. Its not as clean a finish when its done but it sure wont gove out so easy.

Otherwise any 86-96 lower dash panel will fit in place of it. I may have 1 or 2 laying around if you don't mdon'paying a little cash and the cost of shipping.
Thanks v. helpful. I might take you up on that. Will PM you.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Josh Rozzi
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Jun 13, 2021 08:57 PM
lostbuckaroo
Modified XJ Cherokee Tech
1
Dec 2, 2011 12:35 PM
jwrath7
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Oct 13, 2010 07:48 PM
JeepingDan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
May 9, 2009 05:44 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 02:37 PM.