lower instrument panel
10-13-2010, 06:12 PM
#1
Newbie
Thread Starter
Join Date: Oct 2010
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
lower instrument panel
long time Cherokee owner, but new to this forum.
the hi/lo wiring for my A/C / heater control is fried and I would like to replace it. If anyone can give tips on the best way to do that, let me know.
my real question is, are there suppose to be rivets on the very bottom of the lower instrument panel? (Image attached)
the plastic portion is riveted to the metal underneath. Is this normal or some after the fact bodywork? the Haynes manual doesn't mention anything about rivets anywhere in the instrument panel section.
the hi/lo wiring for my A/C / heater control is fried and I would like to replace it. If anyone can give tips on the best way to do that, let me know.
my real question is, are there suppose to be rivets on the very bottom of the lower instrument panel? (Image attached)
the plastic portion is riveted to the metal underneath. Is this normal or some after the fact bodywork? the Haynes manual doesn't mention anything about rivets anywhere in the instrument panel section.
Last edited by jwrath7; 10-13-2010 at 06:14 PM.
Thread
Thread Starter
Forum
Replies
Last Post
ZJBeachRunnerGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
18
03-10-2021 05:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)