Multifunction switch help
02-21-2016, 01:09 PM
#1
Newbie
Thread Starter
Join Date: Dec 2011
Location: Georgia
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 6 Cyl. 4.0L Bored .040
Multifunction switch help
Would anyone by chance have the wiring schematic for the multifunction switch connector? I have had to get anew connector and in error misaligned the pins while resetting them to the new connector. I personally have a 95 xj,believe from 92-96 had the same switch. Any help is appreciated
02-27-2016, 10:38 AM
#3
Newbie
Thread Starter
Join Date: Dec 2011
Location: Georgia
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 6 Cyl. 4.0L Bored .040
I appreciate the response, I found that image from one of the many sites I searched. I did end up pulling every schematic I could find And tested all possible circuits. I made an actual diagram with wire colors that go in what position on the connector and will upload it on here when I can so if anyone else needs info on it it will be available.
Thread
Thread Starter
Forum
Replies
Last Post
Chris Embler
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
08-24-2016 10:36 PM
jasw
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
02-18-2016 12:01 PM
NCMTN
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
02-16-2016 09:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)