wiring harness hell
02-17-2016, 12:17 PM
#1
Member
Thread Starter
Join Date: Oct 2015
Location: Portland, OR
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1986
Model: Cherokee
Engine: 2.8
wiring harness hell
so beginning my chassis harness strip down and work. seems like a simple idea right? not really. I am eliminating every unneeded/ unwanted circuit, but wait there's more.... I also have to manage integrating a TBI ECU into the whole mix, thankfully I have just about every wire out and the interior is stripped down to almost nothing. 
02-17-2016, 02:34 PM
#3
CF Veteran
Join Date: Dec 2011
Location: IE (SoCal)
Posts: 1,080
Likes: 0
Received 6 Likes
on
5 Posts
Year: 1994 SE
Model: Cherokee
Engine: 4.0
LOL! I kind of know what you're going through. Years back when I chopped my bike I had to take this...
...out of this...
...then lengthen/reroute/add what was needed. Amazing how much wire was on such a basic bike.
Check three times, mark twice, then proceede.
...out of this...
...then lengthen/reroute/add what was needed. Amazing how much wire was on such a basic bike.
Check three times, mark twice, then proceede.
02-19-2016, 07:19 AM
#4
Member
Thread Starter
Join Date: Oct 2015
Location: Portland, OR
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1986
Model: Cherokee
Engine: 2.8
it is a total nightmare... I have spent maybe 3 hours just trying to ohm out specific circuits and deleting unneeded stuff. next will be soldering the chassis harness back together after layout. deleting all the quick connects and looming everything. just might say to hell with it and ordering a howell efi harness
Thread
Thread Starter
Forum
Replies
Last Post
Chris Embler
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
08-24-2016 10:36 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)