Loud poping sound while bleeding slave cylinder? HELP NEEDED
#1
Member
Thread Starter
Join Date: Nov 2009
Location: wa
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1986
Model: Cherokee
Engine: 2.5L
Loud poping sound while bleeding slave cylinder? HELP NEEDED
Hi, I installed a new slave cylinder and while bleeding, a loud pop sound occurred. After the pop, the clutch pedal went rock hard. I removed the slave cylinder and re-installed evervything. Again while bleeding it a loud pop occured, but this time the pedal was a little softer than normal. After the second pop occured it allowed me to put it in all of the gears which it would not previously let me do. I have never heard this pop before nor had this problem Anybody with an idea is great help now.
I installed a new slave because the pedal was going straight to the floor and the tranny wouldn't go into any gears. I had to pump the clutch and fill the master cylinder to get into any gear. On a 5 mile drive home, I had to pull off 3 times to pump the clutch and fill the master cylinder. I determined it was a broken slave cylinder cuasing the problem. I am not 100% convienced now, What else can it be? What was the pop? Thanks.
I installed a new slave because the pedal was going straight to the floor and the tranny wouldn't go into any gears. I had to pump the clutch and fill the master cylinder to get into any gear. On a 5 mile drive home, I had to pull off 3 times to pump the clutch and fill the master cylinder. I determined it was a broken slave cylinder cuasing the problem. I am not 100% convienced now, What else can it be? What was the pop? Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
2000CHERO
Modified XJ Cherokee Tech
20
10-12-2015 11:03 PM
JWB37
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
08-29-2015 12:03 PM
AKghandi
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
08-28-2015 02:09 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)