Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Loud Click ???

Thread Tools
 
Search this Thread
 
Old 08-23-2008, 02:51 PM
  #1  
Newbie
Thread Starter
 
KRUSHA29's Avatar
 
Join Date: Aug 2008
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 Renix, Oh Yea!
Default Loud Click ???

I went and drove thru a couple of mud puddles and now when I turn to the right I hear a loud click noise on the drives side. Any idea what this is and how can I fix it... I looked under the front end and I dont see anything that looks broken or hanging down.... I lost!!!!
Old 08-23-2008, 03:22 PM
  #2  
Renix Super Guru
 
BlueXJ's Avatar
 
Join Date: Mar 2008
Location: In yourz postez fissin jurr spelinzs
Posts: 24,653
Likes: 0
Received 16 Likes on 12 Posts
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
Default

Might be an axle u-joint getting ready to crap out on ya!!!
Old 08-23-2008, 03:47 PM
  #3  
Newbie
Thread Starter
 
KRUSHA29's Avatar
 
Join Date: Aug 2008
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 Renix, Oh Yea!
Default

How do I find out for sure and how long till it blows up??
Old 08-23-2008, 03:58 PM
  #4  
CF Veteran
 
whowey's Avatar
 
Join Date: Apr 2008
Location: Northern Illinois
Posts: 2,237
Likes: 0
Received 3 Likes on 3 Posts
Year: 90
Model: Cherokee
Engine: 4.0
Default

Did it do it only once or does it keep doing it?
Many times a u-joint will make noise after a trip through standing water. It doesn't always mean that a U-joint is bad. Do you have greasable joints?

Climb underneath the Jeep. Grab the axle shaft where it comes out of the tube heading into the yoke(the part that is enlarged and the u-joint is in the middle). Try wiggling it both directions. Slop in there will let you know the joint is really toasted and needs replaced now.
Old 08-23-2008, 05:39 PM
  #5  
Newbie
Thread Starter
 
KRUSHA29's Avatar
 
Join Date: Aug 2008
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 Renix, Oh Yea!
Default

Yes it looks like I have greasable joints...

Ok I went and out and grabbed the axle shaft and tryed to move it... no real luck. So now what?
Old 08-23-2008, 05:39 PM
  #6  
Senior Member
 
jeepride's Avatar
 
Join Date: Jul 2008
Location: West Virginia
Posts: 709
Likes: 0
Received 0 Likes on 0 Posts
Year: 98
Model: Cherokee
Engine: 4.0L
Default

Sounds like u-joint is going bad
Old 08-23-2008, 05:41 PM
  #7  
Senior Member
 
jeepride's Avatar
 
Join Date: Jul 2008
Location: West Virginia
Posts: 709
Likes: 0
Received 0 Likes on 0 Posts
Year: 98
Model: Cherokee
Engine: 4.0L
Default

If they are greasable try to grease them you will most likley need a needle adapter for your grease gun.
Old 08-23-2008, 06:23 PM
  #8  
Member
 
littleblueman's Avatar
 
Join Date: Aug 2008
Location: Sticks, NC
Posts: 174
Likes: 0
Received 0 Likes on 0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
Default

Another thing to check is the wheel stops. Where steel meets steel when you turn the wheel all the way to one side. If it got wet and muddy, then dry, it may pop loudly. Rub a lil heavy grease on the contact surface and it may help. Of course check what the other guy's posted first!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jmsummers2012
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
53
04-30-2021 02:35 PM
ROCKRIDGE 4WD
Vendor Showcase
6
07-13-2016 12:11 PM
pantallica20@aol.com
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
4
10-01-2015 02:58 PM
TheDesertlights
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-28-2015 11:54 PM
pantallica20@aol.com
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-26-2015 07:05 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Loud Click ???



All times are GMT -5. The time now is 03:22 AM.