Leaked clutch fluid all over fuse block
09-01-2010, 09:18 AM
#1
Junior Member
Thread Starter
Join Date: Sep 2008
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0L I6
Leaked clutch fluid all over fuse block
Been there for months now my fuses wont stay in place. I need to change my Block i guess. i cant afford to take it to a shop. Anyone know a way to change it?
09-01-2010, 10:15 AM
#2
Honorary Moderator
Join Date: Mar 2010
Location: Gilbert AZ/Las Cruces NM
Posts: 8,135
Likes: 0
Received 13 Likes
on
11 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
The seal where the clutch pedal connects to the master cylinder normal goes out, it is easier and cheaper to replace the master cylinder than to try to replace the fuse block. Take all of the fuses out of the fuse block(making sure you know what slots they go in) take an air compressor and try to get as much fluid as yuou can out! i would use a shop rag to collect it from going anywhere. Then take the fuse block off the fire wal and get the back side of it. I would replace the fuses as well. Dot3 fluid will eat away at the plastic like its noones business.
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
11-07-2015 01:22 AM
DaFisch
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-06-2015 02:38 AM
sikkev
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-05-2015 11:33 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)