Leak Detector pump P1694
04-29-2018, 09:02 PM
#1
Newbie
Thread Starter
Leak Detector pump P1494
Ok, as I am chasing around an emissions P0441 I decided to pull out the LDP and do a bench test. I put a jumper from the Jeep battery to the terminal on the LDP connector. and a jumper to ground. (there were 3 terminals)
I think I put the battery jumper on the wrong terminal. And now I have a P1494. ummmm I think I screwed up the LDP. I was thinking about replacing it anyways with it being stock in a 339.000 mile jeep. But I admit I don't do electrical much and probably should've known for sure where it went.
So if I had put the hot jumper on the wrong terminal could I have screwed it up ??
Marc
I think I put the battery jumper on the wrong terminal. And now I have a P1494. ummmm I think I screwed up the LDP. I was thinking about replacing it anyways with it being stock in a 339.000 mile jeep. But I admit I don't do electrical much and probably should've known for sure where it went.
So if I had put the hot jumper on the wrong terminal could I have screwed it up ??
Marc
Last edited by Marc in az; 04-29-2018 at 10:04 PM. Reason: wrong code
Thread
Thread Starter
Forum
Replies
Last Post
MichiganCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
07-27-2013 04:02 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)