kicked in door
Thread Starter
CF Veteran
Joined: Feb 2011
Posts: 2,450
Likes: 2
From: Dubuque IA,Libertyville IL
Year: 1992
Model: Cherokee
Engine: 4.0 HO
ok so the other night i went muddin and my jeep is completely covered in mud, well later that night i went to a friends house so they could drive me to a party. i went to pick up my jeep in the morning to find out there are drawing in the mud and my passenger door is kicked in. i cant open the door at all and its my only way into my jeep i popped the dent out with a plunger but it wont unlock with the key or the switch. is there any way i can get it opened to fix it. i have to climb through the hatch just to open my door now.
Junior Member
Joined: Jul 2011
Posts: 77
Likes: 0
From: Escondido, CA
Year: 1998
Model: Cherokee
Engine: 4.0L
You are going to need to remove the door panel and find out what is stopping the door lock from opening.
Does your Jeep have manual or electric door locks....?
Check the linkage and the connector for the solenoid.....
Does your Jeep have manual or electric door locks....?
Check the linkage and the connector for the solenoid.....
CF Veteran
Joined: Nov 2008
Posts: 7,874
Likes: 100
From: Northern Ontario, Canada
Year: 1990, 1999, 2000
Model: Cherokee
Engine: 4.0
you need to lift it higher so no one can reach their leg that high.
x2 on removing the inner panel to find the lock rod popped off.
does the lock work via the thumb button?
x2 on removing the inner panel to find the lock rod popped off.
does the lock work via the thumb button?
Thread Starter
CF Veteran
Joined: Feb 2011
Posts: 2,450
Likes: 2
From: Dubuque IA,Libertyville IL
Year: 1992
Model: Cherokee
Engine: 4.0 HO
i cant lift any higher otherwise i wont be able to get in. its eletric locks and the thumb button works to lock the door but doesnt go all the way into the unlock postion. i think that it might be the linkage just off. thanks for the help ill try to fix it when it stops raining.
Thread Starter
CF Veteran
Joined: Feb 2011
Posts: 2,450
Likes: 2
From: Dubuque IA,Libertyville IL
Year: 1992
Model: Cherokee
Engine: 4.0 HO
well im in college and my friends house was just down the street from our cross town rival that we just killed in football last week and they were drawing "***" "gay" and drawing *****'s all over it. and there is this guy that lives around the corner from where i parked that has a lifted wrangler and they did the same thing to his that night cuz his was also muddy
CF Veteran

Joined: Oct 2010
Posts: 2,150
Likes: 12
From: Ontario, Canada
Year: 1989 Laredo
Model: Cherokee
Engine: 4.0 L 6 Renix
That really sucks, my condolences to you and your XJ.
I've been able to remove the door panel from the inside in the past, need to remove the handles 1st, peel from the bottom up, lift the top straight up as it latches just below the window,should be able to then reach in to the latch mechanism. Once you get it open perhaps you can knock the dent back out from the inside. Even as a temporary measure, call it a trail scar.
If you do some day find the one responsible it would not be in good taste to suggest perhaps use them as a battering ram to pop the dent.
I've been able to remove the door panel from the inside in the past, need to remove the handles 1st, peel from the bottom up, lift the top straight up as it latches just below the window,should be able to then reach in to the latch mechanism. Once you get it open perhaps you can knock the dent back out from the inside. Even as a temporary measure, call it a trail scar.
If you do some day find the one responsible it would not be in good taste to suggest perhaps use them as a battering ram to pop the dent.
Trending Topics
CF Veteran
Joined: Aug 2011
Posts: 10,489
Likes: 24
From: Nor-Cal Coast
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
On my 90, if you open the passenger door and look forward down there in the crack you can see an angled slot on the front door. With a long screw-driver push DOWN inside the slot.
Thread Starter
CF Veteran
Joined: Feb 2011
Posts: 2,450
Likes: 2
From: Dubuque IA,Libertyville IL
Year: 1992
Model: Cherokee
Engine: 4.0 HO
That really sucks, my condolences to you and your XJ.
I've been able to remove the door panel from the inside in the past, need to remove the handles 1st, peel from the bottom up, lift the top straight up as it latches just below the window,should be able to then reach in to the latch mechanism. Once you get it open perhaps you can knock the dent back out from the inside. Even as a temporary measure, call it a trail scar.
If you do some day find the one responsible it would not be in good taste to suggest perhaps use them as a battering ram to pop the dent.
I've been able to remove the door panel from the inside in the past, need to remove the handles 1st, peel from the bottom up, lift the top straight up as it latches just below the window,should be able to then reach in to the latch mechanism. Once you get it open perhaps you can knock the dent back out from the inside. Even as a temporary measure, call it a trail scar.
If you do some day find the one responsible it would not be in good taste to suggest perhaps use them as a battering ram to pop the dent.
CF Veteran
Joined: Aug 2011
Posts: 10,489
Likes: 24
From: Nor-Cal Coast
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
???? If it's a 4 door I think you can open it by pushing down inside that slot. You can see what it looks like better on the other side.
EDIT>>>Oh...I meant open the rear door to get at the back of a front door. The rear door has the slot also, but will take a custom bent tool to get in there. Again you can see it in the other side.
EDIT>>>Oh...I meant open the rear door to get at the back of a front door. The rear door has the slot also, but will take a custom bent tool to get in there. Again you can see it in the other side.
Last edited by DFlintstone; Sep 25, 2011 at 06:44 PM.
CF Veteran
Joined: Oct 2009
Posts: 2,867
Likes: 16
From: Fauquier County, Virginia
Year: 1991
Model: Cherokee
Engine: I-6 4.0 HO
Side Rant: I can't stand punks who do this type of crap. Both my '91 XJ and '07 Focus have had key marks scratched onto them. Then one day I went outside to find a dent in the lower portion of the fender. I think I'm going to fab up a steel skeleton for the inside of the body, so when ****** try to kick or hit anything, they find out real quick that steel is stronger than bone. I'm also going to have live current flowing through the body, so when people try to scratch it or key it, they get the **** shocked out of them.
Rant Over. Im sorry, but crap like this just irritates me. I hope you get the door fixed. Good luck to ya.
Rant Over. Im sorry, but crap like this just irritates me. I hope you get the door fixed. Good luck to ya.
Last edited by 1991Jeep_Man; Sep 25, 2011 at 07:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post
SouthSeaPirate
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Sep 24, 2015 03:44 PM
BluJay
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Sep 23, 2015 11:22 AM
cherokeexj21
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
8
Sep 16, 2015 11:22 AM
Gauge
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
Sep 5, 2015 11:02 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



