Interior Spare Question
Thread Starter
Seasoned Member
Joined: Mar 2009
Posts: 443
Likes: 0
From: Northwood, Ohio
Year: 1996
Model: Cherokee
Engine: 4.0
What is the largest spare that anyone is running in the stock inside location? I want a full size spare or at least close to it. Looking for a recommendation. I don't know if a 30 will fit so i may need to step down to a smaller size. Any suggestions?
Seasoned Member
Joined: Jan 2009
Posts: 443
Likes: 2
From: Prescott, AZ
Year: 1996
Model: Cherokee
Engine: 4.0L
my first xj (4 cylinder) came with a donut spare. The one I have now (4.0) came with a full sized spare. The difference was the bolt that mounts it to the wall (the one for the full sized tire is longer). I use both, the donut when I'm kicking around town cause I want more space in my interior, and the full sized tire for when I'm wheeling (don't want to run the donut on rocks in 4wd). I think my full sized is 29", but there is some room for a little bigger, probably a 30", 31" would be pushing it.
Hope this helps
Hope this helps
Seasoned Member
Joined: Jan 2009
Posts: 454
Likes: 0
From: Middle Tennessee
Year: 2001
Model: Cherokee
Engine: 4.0L I6
CF Veteran
Joined: Mar 2009
Posts: 2,750
Likes: 3
From: Visalia, Kalifornia, ussa
Year: 1996
Model: Cherokee
Engine: 4.0
I have 31", stock bracket removed. I just ratchet strap it in, in the stock location. You might be able to get a 32" in if real low air pressure.
Trending Topics
CF Veteran
Joined: Nov 2008
Posts: 1,251
Likes: 0
From: Eugene, OR
Year: 01
Model: Cherokee
Engine: 4.0L I6
the floor bracket is gone and its just ratchet strapped in there. doesn't shift at all on the trail and i still have room for tools and what not. and theres also still room back there for me to sleep haha.
Thread
Thread Starter
Forum
Replies
Last Post
98JGC826
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
Sep 3, 2016 08:10 PM
SouthSeaPirate
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Sep 7, 2015 11:29 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



