I need engine mount recommendations

Reply Subscribe

Thread Tools

Search this Thread

Nov 16, 2023 | 05:06 AM

#16

pineapple_tree

Thread Starter

Senior Member

Joined: Aug 2021

Posts: 514

Likes: 74

Year: 1995

Model: Cherokee (XJ)

Engine: 2.5

Quote:

Originally Posted by Unega

I am under the impression that there is a tone ring on flywheels / flex plates that the CPS use to determine crank position. Not sure that you could run with a Dakota flywheel. I know I had to swap my flywheel along with the distributor, intake manifold, etc. to run a 91 long block in an 88

They do, but the Dakota flywheel has the same number of teeth as the Jeep if they both have the 2.5. I actually used the Dakota’s crank sensor with the OBD2 connector because I couldn’t find an OBD1 connector anywhere.

Anyway, I can’t find a new flywheel anywhere for the Dakota 2.5. I did however find a few used ones and I’ll more than likely use a used one and either resurface it or have someone resurface it. Maybe that’ll help with my vibrations along with those Browndog mounts