I have an 1988 cherokee and I dropped a so called stinker in it
#1
Junior Member
Thread Starter
Join Date: Jun 2017
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
I have an 1988 cherokee and I dropped a so called stinker in it
I don't have any Spark It's a 1991 block with newer ho stuff on it. Piece together a few different wiring harnesses from 91 through 95 Jeep distributors coils crankshaft positioning sensors still no spark what else should I try thank you
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Jun 2017
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
I bought one of them in line bulb testers for spark plugged it in between my distributor and coil no light I looked at a jeep today and it had a park neutral switch hooked up would that stop it from sparking or what do you think
#10
Junior Member
Thread Starter
Join Date: Jun 2017
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
#11
Junior Member
Thread Starter
Join Date: Jun 2017
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
#13
No, I don't lick fish.
1991 was the first year for the HO... so if you put HO on an HO motor... you still have HO. "HO stuff" from 1991-1995 (and some 1996) are interchangeable. It would help if you were a little more specific on what you did and didn't do. You shouldn't have had to "piece together a few different wiring harnesses from 91 through 95" either... 91-95 are the same - the exception being most 91 & 92s use the old "renix style" distributor... but the harness for the renix style and the "newer" early HO style is still the same.
It sounds like you're trying to use HO electronics with Renix electronics... which will be your downfall. You need the ECU from an HO if you're going to use HO.
#14
Junior Member
Thread Starter
Join Date: Jun 2017
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Yes i
[QUOTE=Basslicks;3402769]"..1991 block with newer HO stuff on it..." what?
1991 was the first year for the HO... so if you put HO on an HO motor... you still have HO. "HO stuff" from 1991-1995 (and some 1996) are interchangeable. It would help if you were a little more specific on what you did and didn't do. You shouldn't have had to "piece together a few different wiring harnesses from 91 through 95" either... 91-95 are the same - the exception being most 91 & 92s use the old "renix style" distributor... but the harness for the renix style and the "newer" early HO style is still the same.
It sounds like you're trying to use HO electronics with Renix electronics... which will be your downfall. You need the ECU from an HO if you're going to use
yes I did use a go computer ? 4 sure I think or I wonder is the fly wheel from a 1996 same as 1992? If no that could be my problem. Or I am using a harness from a 1994 manual in a automatic 1988 jeep. I don't think that would matter much right?
1991 was the first year for the HO... so if you put HO on an HO motor... you still have HO. "HO stuff" from 1991-1995 (and some 1996) are interchangeable. It would help if you were a little more specific on what you did and didn't do. You shouldn't have had to "piece together a few different wiring harnesses from 91 through 95" either... 91-95 are the same - the exception being most 91 & 92s use the old "renix style" distributor... but the harness for the renix style and the "newer" early HO style is still the same.
It sounds like you're trying to use HO electronics with Renix electronics... which will be your downfall. You need the ECU from an HO if you're going to use
yes I did use a go computer ? 4 sure I think or I wonder is the fly wheel from a 1996 same as 1992? If no that could be my problem. Or I am using a harness from a 1994 manual in a automatic 1988 jeep. I don't think that would matter much right?