I cannot understand how tr. case works.
#1
Banned
Thread Starter
Join Date: Jan 2012
Location: FL
Posts: 415
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: 4.0
I cannot understand how tr. case works.
I was looking at the diagram for pretty long time, trying to understand how it works.
I still don't understand how torque is transferred in 2wd mode.
Here is what I figured out:
synch. sleeve has 2 positions: 2wd and 4wd (in 4wd mode it engages drive sprocket)
range shift hub has 3 positions (?????): 4L, N and 4H (in 4L mode it moves in low range gear (???????))
So, how 2wd mode works? How torgue is transfered from input gear 670 (top of diagram) to main shaft 672 (red line)?
I still don't understand how torque is transferred in 2wd mode.
Here is what I figured out:
synch. sleeve has 2 positions: 2wd and 4wd (in 4wd mode it engages drive sprocket)
range shift hub has 3 positions (?????): 4L, N and 4H (in 4L mode it moves in low range gear (???????))
So, how 2wd mode works? How torgue is transfered from input gear 670 (top of diagram) to main shaft 672 (red line)?
Last edited by car5car; 09-16-2012 at 09:03 PM.
#3
Banned
Thread Starter
Join Date: Jan 2012
Location: FL
Posts: 415
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: 4.0
I have to respect moderator!
If you don't know how TC works, it is OK, just say so!
Casey, nice albums!
Didn't you damage roof by sitting on it?
If you don't know how TC works, it is OK, just say so!
Casey, nice albums!
Didn't you damage roof by sitting on it?
Last edited by car5car; 09-16-2012 at 08:53 PM.
Trending Topics
#8
Renix Super Guru
Join Date: Mar 2008
Location: In yourz postez fissin jurr spelinzs
Posts: 24,653
Likes: 0
Received 16 Likes
on
12 Posts
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
Why can't you figure out that when you shift to 4WD you engage the internal gear which puts torque to the chain and thus the front driveshaft. It works by sliding the gear into and out of the sync hub.
#10
Banned
Thread Starter
Join Date: Jan 2012
Location: FL
Posts: 415
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: 4.0
It seems like I figured it out, I corrected diagram.
Input gear has inner teeth, connecting with range hub in H position
Are range hub positions on green arrow correct?
from left to right on diagram H-L-N???
Last edited by car5car; 09-16-2012 at 09:05 PM.
#13
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,875
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
of 09/14/2012 at 10:30 AM by car5car:
I'll be out of this forum in about 2-3 days, almost done with XJ.
Cadillac and Expedition engines are next.
You are all right. Why should I waste my time trying to help somebody?
From now on I will not.
Let the countdown begin!!