How to swap Dana 35 for 8.25
#31
Member
Join Date: Jan 2010
Location: north carolin
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
You will have to either change or shorten you driveshaft i just changed my dana 35 for an 8.25 and i had to have my driveshaft shortened an inch cause it was bottoming out in my transfercase
#34
Newbie
Join Date: Sep 2009
Location: Loganville Ga
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
I have a 91 with a 4.5" lift and did the same swap without doing anything to the D/S worked fine for me just make sure you have the new Ubolts
Last edited by bannanaboat; 03-08-2010 at 07:46 PM.
#36
i'm doing the same swap. i have the 8.25 axle here in front of me and noticed the cables on the axle are different. My jeep is a 93 XJ with a Dana 35 in it. what i purchased was is a 96 XJ Chrysler 8.25 axle. dana has (3) cables going to each side, but the Chyrsler has (2) going to each side. someone please help!!!!
#37
Senior Member
Join Date: Apr 2009
Location: New Waverly, Tx
Posts: 954
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1997
Model: Cherokee
Engine: Used engine just put in less than 79kmiles onit jeepersCreepers 60mm TB, '99-'01 intake, BorlaHeader
i'm doing the same swap. i have the 8.25 axle here in front of me and noticed the cables on the axle are different. My jeep is a 93 XJ with a Dana 35 in it. what i purchased was is a 96 XJ Chrysler 8.25 axle. dana has (3) cables going to each side, but the Chyrsler has (2) going to each side. someone please help!!!!
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthCent]: 4.56 gear set and master install kits D30 and D44
dcollins3208
Axles/Tires/Wheels
12
12-11-2015 11:49 AM
codykrr
Modified XJ Cherokee Tech
9
09-18-2015 01:27 PM
Ibanezz
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
24
09-10-2015 07:15 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)