how do i remove the radio bezel on a 97+????
12-31-2009, 05:19 PM
#2
Newbie
Join Date: Dec 2009
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Mine is a little bit older, but it should be just four screws and the rest of it is clips that just pop out. There should be 2 under the dash at the speedo and one by the headlight switch and one by the cig lighter.
12-31-2009, 05:33 PM
#3
CF Veteran
Join Date: Jan 2009
Location: Northfield MN
Posts: 1,242
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1995
Model: Grand Cherokee
Engine: 5.2 v8
If you are talking about the trim around the radio/heater controls ect it just pulls off. If you move the shifter away from park it also makes it easier to pull off. Once you get a corner popped it comes off easy.....i usually start on the bottom.
The following users liked this post:
RayBone (11-02-2023)
12-31-2009, 05:45 PM
#4
Member
Join Date: Oct 2009
Location: Martinsburg,WV
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0. H.O. 242 6-Shooter
http://arrc.epnet.com/autoasp/framerq.asp
tech/tech, scroll down to auto repair reference center, then go to 94 cherokee( dunno if its listed on other years) then chassis electrical,instruments and switches then instrument cluster.
tech/tech, scroll down to auto repair reference center, then go to 94 cherokee( dunno if its listed on other years) then chassis electrical,instruments and switches then instrument cluster.
Last edited by BeepBeepImaJeep; 12-31-2009 at 05:48 PM.
01-01-2010, 10:59 AM
#5
CF Veteran
http://arrc.epnet.com/autoasp/framerq.asp
tech/tech, scroll down to auto repair reference center, then go to 94 cherokee( dunno if its listed on other years) then chassis electrical,instruments and switches then instrument cluster.
tech/tech, scroll down to auto repair reference center, then go to 94 cherokee( dunno if its listed on other years) then chassis electrical,instruments and switches then instrument cluster.
01-01-2010, 11:59 AM
#6
Member
Join Date: Oct 2009
Location: Martinsburg,WV
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0. H.O. 242 6-Shooter
01-01-2010, 12:06 PM
#7
Senior Member
Join Date: Apr 2009
Location: Phillipsburg, NJ
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.ol renix
Yes just pull....I use a butter knife to pry from the top....u can warp a towel around the knife if you concerned about scratching your trim.
Trending Topics
01-01-2010, 12:35 PM
#8
CF Veteran
Join Date: Jul 2009
Location: New Jersey (Milltown, Lavallette, and Wayne)
Posts: 2,245
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L I6
The whole thins is connected by pressure clips on the dash so slip you fingers on each side of your center console and pull the cetner piece of the dash trim off. Once that's off there are two screws that hold your radio into the dash itself. Un-screw them and then you have full access to it
The following users liked this post:
RayBone (11-02-2023)
Thread
Thread Starter
Forum
Replies
Last Post
bradleyheathhays
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
10-03-2015 09:51 PM
SouthSeaPirate
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 11:29 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)