Help with starter
#1
Junior Member
Thread Starter
Join Date: Jan 2011
Location: Centennial, CO
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Year: 91
Model: Cherokee
Engine: 4.0L
Help with starter
My ignition broke last August and I haven't got around to fixing it yet (the gears inside are stripped), so I've been starting with the ignition switch using a screwdriver and I went out to start it the other day and it wouldn't, so I had to get underneath and start it by touching both posts with a screwdriver, so does anyone know why my ignition switch won't work, it should be fine i just got it replaced, and just went and bought a new one and tried it but same problem. Help me out please.
#3
Member
Join Date: Jul 2010
Location: Largo, Florida
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
Check the top of your steering column under the dash there is a rod that comes down and operates a mechanical switch, sometimes it dislodges and will not operate. You put the cylinder in correctly right?
#4
Junior Member
Thread Starter
Join Date: Jan 2011
Location: Centennial, CO
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Year: 91
Model: Cherokee
Engine: 4.0L
Everything comes on when i turn it to on. and no the ignition switch is not attached to my steering column it is dangling because i have to use a screwdriver to start it cause my ignition is f'ed up
#5
Thread
Thread Starter
Forum
Replies
Last Post
mattsmith
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
10-02-2015 04:46 PM
Cherokee_of_Tennessee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-30-2015 12:10 PM
Dr.Capacitor
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-25-2015 03:02 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)