Hello, first thread here.

My cherokee has a 4" spacer lift up front and an addaleaf in the back.

My problem is my right side (front and back) sags way lower then my left.

This makes my jeep drive like crap. I have moved my trackbar over 3/4" but that did not help.

I bought the rubicon express trackbar but have not installed it yet.

Cheers

 

how old is the lift? how did your leafs look when you added the aal? was it sagging b4 you put the lift on? 4" spacer or 4" lift coils?

 

welcome!

and if you still have the stock control arms then your springs are going to bow and it makes them sag way fast. and the AAL's are going to sag really fast as well if you have a block or a led foot.

 

The front lift came on the jeep. Its just spacers over the coils. When I installed the addaleaf the springs seemed even. But even with the addaleaf I did not notice a change at all with the sag. Making me think its not the rear leafs. I am using stock control arms at the moment.

Also going into corners I lean into right corners nicely, but on left corners the steering fights to be centered again and I dont lean into them at all. Its also alot easier to turn right then left

 

Heres some pics, Its pretty bad and before the addaleaf with a full truck it would rub bad only on the right

 

Have you checked to make sure that everything is sitting in the right places and meaured the heights and all that. It is saggin in both the back and the front?

 

I have not done any measuring yet. What do you think I should measure, like where to where? Im not sure whats sagging more, front or back.

 

okay, stock suspension is 7" from top of the axle TUBE to the bottom of the UNIRAIL in the front and 6" in the back with the same measurements. measure all 4 corners and report =]