so I have issues with my xj... it wont start and has no spark, i replaced the ignition coil, crank position sensor, and distributer pickup coil, and still nothing, what else could it be?


and my front is sagging a bit how do i fix that?

 

Is it turning over?

 

Year, engine, trans? Don't throw parts at it before doing some simple diagnosis. Check your grounds, check your battery connections, if it doesn't turn over try starting it in neutral if it's an AW4.

 

95, ax-15 trans, was a 4.0 motor but is now a 4.6 stroker, battery connection is good, cranks but doesnt start, i dont know what it could be at this point

 

You say it's now a 4.6 stroker. Has it ran since you put it in?

 

This might sound too obvious but make sure You don't have any plugs you missed and everything is plugged in to it's PROPER matching plug.

 

Also had a problem like this, the pos terminal was the problem the second time, the first was its out of time

 

I bought it with the stroker and drove great up until a couple days ago

 

What year is it? Was the engine work done at a reputable shop, or at least done by someone who has/had experience?

 

Oops. Sorry about the year question. Who did the work?

 

http://m.facebook.com/l.php?u=http%3...=QAQFyom3f&s=1 this should be the link to the build thread

 

The motor was done somewhere but I think they did everything else

 

Any recent changes/repairs or odd behavior before the problem?

 

Check fuses. Didnt see that on your check list.

 

My buddy's got the thing to check if everything is getting power from the battery and it all is, noone I know can figure out why I'm not getting spark, the only things that I changed was the ignition switch, ignition coil, distributer pickup coil, battery, cps, that's it