Help....can't get console off over auto shifter handle?
Would someone know how to get the console out of my 1996 xj cherokee...Can't get the plastic shifter plate over my auto shifter handle?
I don't want to brake the plastic plate...but hole in plate, to small for AUTO handle?
Also ...where does one get shifter ID (for Auto trans)...the area that lets you know what gear to shift into....mine has all but faded away.
Any help would be much appreciated....
Thanks Dave in San Diego dlcody@***.net
I don't want to brake the plastic plate...but hole in plate, to small for AUTO handle?
Also ...where does one get shifter ID (for Auto trans)...the area that lets you know what gear to shift into....mine has all but faded away.
Any help would be much appreciated....
Thanks Dave in San Diego dlcody@***.net
Junior Member
Joined: Sep 2009
Posts: 55
Likes: 0
From: montague,MI
Year: 1995
Model: Cherokee
Engine: 4.0
The local junkyard is probly the best place to find the shifter ID. as far as the handle oowhtra is right just grab it real good and pull straight up, it will come off.
Senior Member
Joined: Oct 2009
Posts: 633
Likes: 0
From: Sutton, New Hampshire
Year: 1995
Model: Cherokee
Engine: 4.0L
Just make sure you put the tranny into neutral or drive before you do so, otherwise you'll bash your hand on the dash. Also, do not do this while standing over the handle. Bad things will happen.
Senior Member
Joined: Sep 2008
Posts: 688
Likes: 1
From: Nashville, TN
Year: 2000
Model: Cherokee
Engine: 4.0L HO
well dang it haha...ive actually managed to figure out how to remove the center console without removing the shifter...this will make it going back in a TON easier...
Thanks...I will do some cking a my local Pick A Part Junkyards.
So far no luck on the handle...even tried a hammer...I will keep trying.
Thanks again ...Dave in San Diego
The local junkyard is probly the best place to find the shifter ID. as far as the handle oowhtra is right just grab it real good and pull straight up, it will come off.
So far no luck on the handle...even tried a hammer...I will keep trying.
Thanks again ...Dave in San Diego
The local junkyard is probly the best place to find the shifter ID. as far as the handle oowhtra is right just grab it real good and pull straight up, it will come off.
Trending Topics
Thanks, So far no luck, even tried a Hammer.
Just make sure you put the tranny into neutral or drive before you do so, otherwise you'll bash your hand on the dash. Also, do not do this while standing over the handle. Bad things will happen.
Just make sure you put the tranny into neutral or drive before you do so, otherwise you'll bash your hand on the dash. Also, do not do this while standing over the handle. Bad things will happen.
Yes, I figured out a way to remove the console without removing the Auto Handle...but it sure would be easier if the handle with removed
Thanks...but so far no luck...even tried a hammer.
But I will keep trying...thanks again Dave
Thanks...but so far no luck...even tried a hammer.
But I will keep trying...thanks again Dave
Thread
Thread Starter
Forum
Replies
Last Post
95cherokee96
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Sep 21, 2015 09:08 AM
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 21, 2015 12:52 AM
thanser
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
Sep 15, 2015 08:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



