HELP!!!!!!!!!!!!!!
Thread Starter
Junior Member
Joined: Jun 2012
Posts: 74
Likes: 0
From: Ohio
Year: 1992
Model: Cherokee
Engine: 4.0 I6
My dad passed away and left me a 1992 Cherokee Laredo 4x4.
It runs Great but i cant get the headlights to work! Fuses are good, lamps are good. When i pull the switch all the way out the back right parking light comes on but the others do not. When i turn on the turn signal (both ways) with headlight switch on they will not work. When i turn the hazard lights on all lights blink like should. PLEASE help!
Thanks!
Mike
Oh and i dont have the money right now to buy a service manual! thanks again
It runs Great but i cant get the headlights to work! Fuses are good, lamps are good. When i pull the switch all the way out the back right parking light comes on but the others do not. When i turn on the turn signal (both ways) with headlight switch on they will not work. When i turn the hazard lights on all lights blink like should. PLEASE help!
Thanks!
Mike
Oh and i dont have the money right now to buy a service manual! thanks again
Last edited by Darkvampmaster; Jun 17, 2012 at 07:04 PM.
CF Veteran
Joined: May 2009
Posts: 1,844
Likes: 4
From: Glen Burnie, MD
Year: 1994
Model: Cherokee
Engine: 4.0 H.O. K&N, Borla headers, custom down pipe, magnaflow hi-flo cat, flowmaster to turn down tip
did you check all the fuses or just the one for the lights. also, do you have an aftermarket radio (i promise, it is relevant)
Thread Starter
Junior Member
Joined: Jun 2012
Posts: 74
Likes: 0
From: Ohio
Year: 1992
Model: Cherokee
Engine: 4.0 I6
thanks guys but the switch is fine. buddy of mine said it might be the turn signal switch in the column. im gonna check that tomorrow will update!
Trending Topics
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,579
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Yep. That's generally the culprit when there are numerous weird problems with the lighting system. Along with the 2 ground wires on the driver's side inner fender near the air cleaner.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



