Jeep Cherokee Forum

Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

headlight wiring upgrade question

Thread Tools
 
Search this Thread
 
Old Aug 9, 2012 | 04:29 PM
Share
  #1  
MossyXJ's Avatar
MossyXJ
Thread Starter
Member
 
Joined: Aug 2010
Posts: 170
Likes: 0
From: Cincinnati
Year: 1998
Model: Cherokee
Engine: 4.0 i6
Default headlight wiring upgrade question
does this come with everything to upgrade both headlights? or do i buy double?

http://www.eautoworks.com/Putco-H4--...s-PRD7540.aspx
Reply
0
Old Aug 9, 2012 | 04:30 PM
Share
  #2  
ZINGGG's Avatar
ZINGGG
CF Veteran
 
Joined: Oct 2011
Posts: 4,440
Likes: 3
From: Seal Beach, CA
Year: 1996
Model: Cherokee
Engine: 4.0 HO Straight Six
Default
Just that and you're set for both.
Reply
0
Old Aug 9, 2012 | 04:43 PM
Share
  #3  
MossyXJ's Avatar
MossyXJ
Thread Starter
Member
 
Joined: Aug 2010
Posts: 170
Likes: 0
From: Cincinnati
Year: 1998
Model: Cherokee
Engine: 4.0 i6
Default
thanks bud. i hear your quite that pro at the upgrade
Reply
0
Old Aug 10, 2012 | 06:46 AM
Share
  #4  
cruiser54's Avatar
cruiser54
::CF Moderator::
 
Joined: Aug 2011
Posts: 43,971
Likes: 1,579
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Default
Originally Posted by MossyXJ
thanks bud. i hear your quite that pro at the upgrade
You're correct. I consider him more of a bright light than a dim bulb myself.
Reply
0
Old Aug 10, 2012 | 02:50 PM
Share
  #5  
MossyXJ's Avatar
MossyXJ
Thread Starter
Member
 
Joined: Aug 2010
Posts: 170
Likes: 0
From: Cincinnati
Year: 1998
Model: Cherokee
Engine: 4.0 i6
Default
Originally Posted by cruiser54
You're correct. I consider him more of a bright light than a dim bulb myself.
pun intended? haha
Reply
0
Old Aug 10, 2012 | 02:55 PM
Share
  #6  
K-SKI's Avatar
K-SKI
Seasoned Member
 
Joined: Jan 2011
Posts: 474
Likes: 0
From: brandenburg ky
Year: 1990
Model: Cherokee
Engine: I6
Default
what i want to know is what wires does it replace all or just a section
Reply
0
Old Aug 10, 2012 | 03:06 PM
Share
  #7  
freegdr's Avatar
freegdr
CF Veteran
 
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Default
Is this plug and play and is this one side or two ?
Reply
0

Trending Topics

Old Aug 10, 2012 | 03:07 PM
Share
  #8  
cruiser54's Avatar
cruiser54
::CF Moderator::
 
Joined: Aug 2011
Posts: 43,971
Likes: 1,579
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Default
Originally Posted by MossyXJ
pun intended? haha
Absolutely.
Reply
0
Old Aug 10, 2012 | 03:09 PM
Share
  #9  
cruiser54's Avatar
cruiser54
::CF Moderator::
 
Joined: Aug 2011
Posts: 43,971
Likes: 1,579
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Default
Originally Posted by freegdr
Is this plug and play and is this one side or two ?
Takes care of both sides.



Cruiser’s Headlight Upgrade Harness Instructions
　
　
Absolutely plug and play. Remove grille and headlamp bulbs. I fed my harnesses from the passenger side starting between the battery and the back of the headlamp housing, over to the driver side. Plug the driver side bulb into the new harness. Attach the new harness's ground wire under one of the small bolts on the radiator support after scraping the paint off under it. Attach the harness to the existing harness behind the grille working toward the passenger side. . Plug the new harness plug into passenger headlamp. Plug original headlamp plug into receptacle on new harness. Attach the ground for the passenger side just like you did the driver side under a radiator support bolt. Attach relays with provided bracket on the passenger side inner fender. Connect power wires to battery.
Reply
0
Old Aug 10, 2012 | 03:15 PM
Share
  #10  
iluvmud's Avatar
iluvmud
Seasoned Member
 
Joined: Jul 2012
Posts: 417
Likes: 0
From: Fort Worth
Year: 1999
Model: Cherokee
Engine: 4.0
Default
Originally Posted by cruiser54
Takes care of both sides.



Cruiser’s Headlight Upgrade Harness Instructions
　
　
Absolutely plug and play. Remove grille and headlamp bulbs. I fed my harnesses from the passenger side starting between the battery and the back of the headlamp housing, over to the driver side. Plug the driver side bulb into the new harness. Attach the new harness's ground wire under one of the small bolts on the radiator support after scraping the paint off under it. Attach the harness to the existing harness behind the grille working toward the passenger side. . Plug the new harness plug into passenger headlamp. Plug original headlamp plug into receptacle on new harness. Attach the ground for the passenger side just like you did the driver side under a radiator support bolt. Attach relays with provided bracket on the passenger side inner fender. Connect power wires to battery.
Kinda makes sense, is there a write up with pics? Hard to visualize right now since my Jeep is in the shop.... also what is the benefit of updating the wiring?
Reply
0
Old Aug 10, 2012 | 03:24 PM
Share
  #11  
cruiser54's Avatar
cruiser54
::CF Moderator::
 
Joined: Aug 2011
Posts: 43,971
Likes: 1,579
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Default
You won't need pics. It will be self explanatory when you're following these instructions.

The benefits are headlights that are about 30% brighter using the existing bulbs.

The electrical load is taken off the headlight switch so it won't get hot and fail on you . It would be nighttime that that would happen.

It provides an upgrade path should you later on desire to put more powerful headlights in.
Reply
0
Old Aug 10, 2012 | 03:34 PM
Share
  #12  
PNWjeeper's Avatar
PNWjeeper
CF Veteran
 
Joined: Feb 2012
Posts: 1,206
Likes: 2
From: Southern Oregon
Year: 1990
Model: Cherokee
Engine: 4.0
Default
I deffinetly need to do this to. I run my lights always. Thanks again cruiser
Last edited by PNWjeeper; Aug 10, 2012 at 03:46 PM.
Reply
0
Old Aug 10, 2012 | 03:36 PM
Share
  #13  
K-SKI's Avatar
K-SKI
Seasoned Member
 
Joined: Jan 2011
Posts: 474
Likes: 0
From: brandenburg ky
Year: 1990
Model: Cherokee
Engine: I6
Default
Originally Posted by cruiser54

Takes care of both sides.

Cruiser’s Headlight Upgrade Harness Instructions


Absolutely plug and play. Remove grille and headlamp bulbs. I fed my harnesses from the passenger side starting between the battery and the back of the headlamp housing, over to the driver side. Plug the driver side bulb into the new harness. Attach the new harness's ground wire under one of the small bolts on the radiator support after scraping the paint off under it. Attach the harness to the existing harness behind the grille working toward the passenger side. . Plug the new harness plug into passenger headlamp. Plug original headlamp plug into receptacle on new harness. Attach the ground for the passenger side just like you did the driver side under a radiator support bolt. Attach relays with provided bracket on the passenger side inner fender. Connect power wires to battery.
I think I get it now moves hot wires strait to the batt. And the original harness becomes the power for the relays
Reply
0
Old Aug 12, 2012 | 02:36 PM
Share
  #14  
PNWjeeper's Avatar
PNWjeeper
CF Veteran
 
Joined: Feb 2012
Posts: 1,206
Likes: 2
From: Southern Oregon
Year: 1990
Model: Cherokee
Engine: 4.0
Default
So I was just reading the description for the wiring harness and it says it works for h4/9003 bulbs, are those the stock bulbs of would you have to buy new bulbs as well?
Reply
0
Old Aug 12, 2012 | 02:43 PM
Share
  #15  
cruiser54's Avatar
cruiser54
::CF Moderator::
 
Joined: Aug 2011
Posts: 43,971
Likes: 1,579
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Default
Originally Posted by PNWjeeper
So I was just reading the description for the wiring harness and it says it works for h4/9003 bulbs, are those the stock bulbs of would you have to buy new bulbs as well?

That's the same plug as your stock bulbs.
Reply
0



Advanced Search

All times are GMT -5. The time now is 08:41 PM.