headlight wiring upgrade question
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Takes care of both sides.
Cruiser’s Headlight Upgrade Harness Instructions
Absolutely plug and play. Remove grille and headlamp bulbs. I fed my harnesses from the passenger side starting between the battery and the back of the headlamp housing, over to the driver side. Plug the driver side bulb into the new harness. Attach the new harness's ground wire under one of the small bolts on the radiator support after scraping the paint off under it. Attach the harness to the existing harness behind the grille working toward the passenger side. . Plug the new harness plug into passenger headlamp. Plug original headlamp plug into receptacle on new harness. Attach the ground for the passenger side just like you did the driver side under a radiator support bolt. Attach relays with provided bracket on the passenger side inner fender. Connect power wires to battery.
Cruiser’s Headlight Upgrade Harness Instructions
Absolutely plug and play. Remove grille and headlamp bulbs. I fed my harnesses from the passenger side starting between the battery and the back of the headlamp housing, over to the driver side. Plug the driver side bulb into the new harness. Attach the new harness's ground wire under one of the small bolts on the radiator support after scraping the paint off under it. Attach the harness to the existing harness behind the grille working toward the passenger side. . Plug the new harness plug into passenger headlamp. Plug original headlamp plug into receptacle on new harness. Attach the ground for the passenger side just like you did the driver side under a radiator support bolt. Attach relays with provided bracket on the passenger side inner fender. Connect power wires to battery.
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,578
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
CF Veteran
Joined: Oct 2011
Posts: 4,440
Likes: 3
From: Seal Beach, CA
Year: 1996
Model: Cherokee
Engine: 4.0 HO Straight Six
Originally Posted by PNWjeeper
^^lol awesome. So the h4/9003 is the plug type not the bulb now I've got it.
Follow the mini write up that cruiser posted and you'll use roughly 30 minutes of your day for a 200% increase in your happiness once you turn em on for the first time at night
CF Veteran
Joined: Feb 2012
Posts: 1,206
Likes: 2
From: Southern Oregon
Year: 1990
Model: Cherokee
Engine: 4.0
So this thread has been inactive long enough that I feel it would be safe to thread jack it.
I finally purchased and installed this upgrade and I can tell its definitely worth the $41 dollars I paid, however, is there anything i could have done during this install to cause my jeep to sputter and die after just driving around the block? Now I will state that I am low on gas, but I didn't think i was THAT low. Could it be that I am in fact that low or is there some sort of wire or plug or anything that I dont know about in that area that would cause these types of symptoms?
I finally purchased and installed this upgrade and I can tell its definitely worth the $41 dollars I paid, however, is there anything i could have done during this install to cause my jeep to sputter and die after just driving around the block? Now I will state that I am low on gas, but I didn't think i was THAT low. Could it be that I am in fact that low or is there some sort of wire or plug or anything that I dont know about in that area that would cause these types of symptoms?
Thread
Thread Starter
Forum
Replies
Last Post
Ye Ol' Cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Oct 9, 2015 10:29 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)