c-loss

hey guys just wondering what the difference was between grand lca's and just cherokee havent had a chance to compare the two but wondering if they will work they are off an 01' grand and i got an 88 cherokee base that i need to get new lowers on. thanks in advance

Kyle

The ZJ's are a bit longer then the XJ LCA's.

c-loss

thanks kyle

BlueXJ

Except length they are stamped steel just like the XJ ones to the best of my knowledge.

Kyle

That is correct.

muddeprived

aren't they bent inwards too which is good for tire clearance?

BlueXJ

Not that I remember but I have very little experience with the GCs.

c-loss

yeah they are bent in just a little. is the length difference big enough to where having a 3" lift would not be ok

nick_n_ii

The WJ control arms are the ones that are bent, ZJ ones are longer but straight. And if i remember right the WJ CA are also boxed...

c-loss

i gotta disagree i had a friend bring these in to me tonight and they are off a grand and they have a curve in the middle.

xjjeepthing

http://go.jeep-xj.info/HowtoWJcontrolarms.htm

The WJ arms are stamped steel, but are rectangular and do have a slight bend in them. The bushing are wider on each end. Either the mounts or the bushing will need to be modified.

nick_n_ii

Both ZJ's and WJ's are Grand Cherokee's so what is there to disagree about?

c-loss

nothing sorry i read your last post wrong i thought you said both of them are straight. sorry for the miscomunication